If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is there anything inline with your breather and intake elbow vacuum port?
I've run catchcans before inline, after a few months i deemed it not needed as factory m20 valve cover has a baffle and only a few drops ever travel to the inlet. Been catchcanless for a long time without any excessive or even moderate oil making it that distance.
M30 on the other hand just pukes oil so it was routed to catchcan. (No baffle on m30 valve covers)
That kinda cool to hear. I know with the local tracks I'll be required to run a catch can but at least it won;t have to be massive. Do you just run off the stock vent location? I know some people have added an additional one.
That kinda cool to hear. I know with the local tracks I'll be required to run a catch can but at least it won;t have to be massive. Do you just run off the stock vent location? I know some people have added an additional one.
Ive run dual ports but jot currently. Will likely do that again
Comment