FORGED FULLY 🐬 grey S50,shaved, KW, brembos, garret g30/770 fr&rear 5 lug,

[Cronopoulos]

Definitely could be bad but the car ran great other than the knock before this , I did change out my coolant temp sensor

Did it help?

[e30m20TurbO7]

i replaced it before i put the engine together and i cant find my old one , i think this may be why my car isnt running , possibly a plugged fuel return line, i havent touched the car in a few days , ive been trying to figure ot what it could be , stuck open injector?

Did it help?

[kid325e]

Are you running a single mas flywheel? What'd you do about the Reference Speed Sensor, and the CPS Sensor? Easy to deal with?

[e30m20TurbO7]

I'm running a single mass flywheel and I didn't mess with any of the sensors it's a bolt in and go

Are you running a single mas flywheel? What'd you do about the Reference Speed Sensor, and the CPS Sensor? Easy to deal with?

[Cronopoulos]

Are you running a single mas flywheel? What'd you do about the Reference Speed Sensor, and the CPS Sensor? Easy to deal with?

The 'I' electronics make those 2 on the bell housing obsolete... I just plugged the holes with some rubber.

[kid325e]

So the I harness "relocates" the sensors? Or just doesn't need them anymore? Either way i'm not worried anymore, just curious.

[Cronopoulos]

So the I harness "relocates" the sensors? Or just doesn't need them anymore? Either way i'm not worried anymore, just curious.

The 885 top-end harness has the CPS on the trigger wheel via the harmonic balancer. I used my 2.7 tranny with a single mass and just plugged off the holes as the the newer harness has no use for them there anymore.

21111225047 is an OEM part# for a plug.

[kid325e]

Ok, thanks for the heads up! Should be straight forward as fuck when I have everything torn out and ready to install.

Now back to our regularly schedule programming..

[e30m20TurbO7]

50 dollar back seat



It's perfect but no more headrest
She's not running I need help she's running lean and I don't know why

[e30m20TurbO7]

Who likes by box haha

[e30m20TurbO7]

I didn't have this lined up where it was supposed to be , in conjunction with timing , removed harmonic balancer and set to correct position and started up first try

[kid325e]

Good work! Did you have the block AND head set to TDC? You didn't hit valves when you installed the head did you??

Sent from my Nexus 4 using Tapatalk 2

[e30m20TurbO7]

timing wasnt wrong but the harmonic balancer was clocked wrong in conjunction with timing

[efficient]

hows your car been runnig after you found the problem?

[e30m20TurbO7]

my cars been running awesome , it has has a little bit of a miss at idle but when i drive it goes away but its barely even noticeable i got the cooling system bled , i took it on the freeway today to like 70 and it ran great my temps just a little bit below the half way mark and i cant wait till shes broken in shes got 112 miles on her and running strong without letting me stranded ever