FORGED FULLY 🐬 grey S50,shaved, KW, brembos, garret g30/770 fr&rear 5 lug,

[e30m20TurbO7]

Thanks condor

[Vivek]

Damn shitty luck but 7k is amazing from insurance. Best of luck with the grey car!

[e30m20TurbO7]

New input shaft seal
30$ zf seal







Things are coming along

[e30m20TurbO7]

It's about to get real



Lathe
Spring perch removed with lathe


That's it for now

[kingston]

Proper! In for more updates!

[e30m20TurbO7]

Cosmoline and bearing replacement
Not easy to remove cosmoline, time consuming.






You try getting suspension this clean.

All new wheel bearings.


Before shot ^

After all clean

Reinforcement welding tomorrow and refinishing all suspension components

Fuck Cosmoline

Tomorrow il update

[eurolife]

Just a tip, I don't know if you have plans on doing it already or not, but I'd weld in some camber/toe adjusters while the subframe is out.

I decided to skip it when mine was out replacing subframe/trailing arm bushings was out the first time, ended up having to drop it again to correct camber/toe in the rear. Sucked.

[e30m20TurbO7]

30mm Subframe riser bushings
That's should solve the problem

Just a tip, I don't know if you have plans on doing it already or not, but I'd weld in some camber/toe adjusters while the subframe is out.

I decided to skip it when mine was out replacing subframe/trailing arm bushings was out the first time, ended up having to drop it again to correct camber/toe in the rear. Sucked.

[eurolife]

Definitely a good choice. Just sure everything was straight before hand. There may be issues those can't fix

[Mr. Tasty]

30mm Subframe riser bushings
That's should solve the problem

they have 30mm risers?!

[e30m20TurbO7]

Gussets
After I came up with this design I found this

"

[e30m20TurbO7]

[e30m20TurbO7]

[iwantspeed]

Don't forget to tighten down the water pump pulley bolts like last time ;)

[BLACKCHARM88]

Build(s) look great man, keep it up and stay motivated!