Announcement

**yahh** · 09-04-2012, 10:14 AM

Here are some pictures of the project, keep in mind that i only paid $650 for it and it runs. In these pictures I have already stripped a lot of panels/molding/lights etc for paint. It will be getting painted alpine white. (PPG Paint code: 91627 (Alpineweiss III) )

Here is the cluster which obviously doesn't show the correct redline for the eta motor.

Motor

Body

Here are some of my Dad's 91 318i that we have done a whole lot of work on already. All it really needs is the hood repainted.
Custom Interior

http://i64.photobucket.com/albums/h194/adijakupovic/20120904_124704.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/20120904_124620.jpg

Exterior

http://i64.photobucket.com/albums/h194/adijakupovic/20120904_124641.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/20120904_124610.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/20120904_124704.jpg

Almost everything on the car is functional and working and all maintenance is done including all new gaskets in the motor. Mine is being built for performance while his is more of a nice to look at cruiser.

**nokincy** · 09-04-2012, 11:07 AM

Clean 3g. Looks like the e30 is in good hands.

**yahh** · 09-04-2012, 07:55 PM

Originally posted by nokincy View Post

Clean 3g. Looks like the e30 is in good hands.

Thank you. The 3G is actually being parted to help fund this, just trying to decide in which direction to go on.

**yahh** · 09-23-2012, 05:21 PM

Picked up a new set of wheels today for the E30. Only flaw is that the stickers are peeling. There is literally no rash on the wheels. 17x7.5 offset 40. I will probably run 15-20 mm spacers. I'll see after I test fit them. I won't be going for slammed, the gap will be similar to my Eclipse.

http://i64.photobucket.com/albums/h194/adijakupovic/IMG_20120923_195539_zpscecea934.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/IMG_20120923_195452_zps6ebe1216.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/IMG_20120923_195217_zpsfcda5596.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/IMG_20120923_195150_zpsa4eb8a01.jpg

Edit : 3-11-13 Sold these to refinish the RS'

**yahh** · 09-24-2012, 06:18 PM

Cleaned one of the wheels up with dawn dish soap + water and removed whats left of the stickers on that wheel. :yum:

Also got Late Model Plastic Bumper on in the front

The rear needs modification so I'm waiting on mounting hardware so I can start modifying it.

Also Found the fuel pump acces unbolted, so I'm going to remove the pump to see what the P/O was doing/trying to do.

Vacuumed the interior finally. Front seats have two tears in them but its not that bad.

Also hit the bay with a little more degreaser .

Removed the rear windows to check for rust. Also can't decide on popouts or fixed windows in the rear. I have both.

Extra Parts

**yahh** · 09-25-2012, 06:16 PM

Here's a picture of the front with the headlight grills on. They will be replaced with euro ones once the car gets painted. Have too much maintenance to do right now.

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25201942.jpg

Also, here is what I pulled from the yard today.

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25191024.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25191020.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25191030.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25191034.jpg

Cleaned the head, valve cover, and intake manifold up

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25194656.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25194646.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25194652.jpg

http://i64.photobucket.com/albums/h194/adijakupovic/2012-09-25195324.jpg

Here is what I pulled today.
Head with full valve-train
Throttle Body
Intake box with AFM
325IS ECU (173)
iFPR, Fuel Rail, and Injectors
Thermostat Housing/ w thermostat
Fan and Water Pump also their pulleys as well as the crankshaft pulley.
IS Lip Spoiler for my dads E30
Wires
Coolant Overflow from an IS
Bunch of Misc stuff.

The timing belt was still on the car so it wasn't snapped. Pistons weren't damaged and valves look good. I will at minimum be replacing all the seals and have it pressure tested at the machine shop and checked to make sure that its true.

Also I read somehwere to grab the brake booster from the 325is, is this credible? If so I'll go back and grab it tomorrow.

11-25-12 Scrapped the m20 build as I found a wrecked 95 M3 for cheap to use as a donor

**Paukert11** · 09-26-2012, 09:15 AM

Hey man, it looks like you are coming a long with your car. Why dont your boost your m20 before you do a b30. the m20 will handle a lot better.

**yahh** · 09-26-2012, 01:02 PM

Originally posted by Paukert11 View Post

Hey man, it looks like you are coming a long with your car. Why dont your boost your m20 before you do a b30. the m20 will handle a lot better.

I am. That as before I had done the research. Eta m20 with the 885 head. From what I have gathered that's the best for boost. I need to edit the OP. I want to be boosted by Christmas. So she can go into paint around January.

**yahh** · 10-27-2012, 07:24 PM

10/3/12

The replacement stickers for the the te37s came in from Eric

Also Picked up 4 cans of R12 Freon, 2 cans of oil, and a charge hose for the AC. It will be for my dad's vert as I probably won't run AC in mine.

10/5/12

Few more updates.

Shocks for the rear bumper came in so tomorrow after work or sunday I will work on fitting/modifying the rear bumper.

Also forgot to picture that I picked up another windshield wiper motor from the yards a few days ago as they like to go bad/ frequently needed.

Now the craziest deal that I have probably ever come across. Re-Upholstered Vinyl Drivers and Passengers Seats in almost perfect condition for $10. Offered to give the guy $50 per seat and he wouldn't take it. I'm very grateful for people like that. I will see how much it will be to get the rear bench seat done to match and I will sell the houndstooth seats.

Driver

Passenger
[/QUOTE]

10/20/12

Found these at the junkyard brand new in the trunk of a 325es :) $3 for OEM

Various Seals

Z4M Shifter, Timing Belt, Tensioner, Alarm

Finally got the correct ODO

Spare E Harness and an I harness for the head swap

Crackfree Dash ;)

How she sits currently.

Here are some pictures of the $800 Jeep :)

I will be restoring the plastic pieces sometime soon and buffing/polishing it. Jeep just needs tires and maybe a windshield which has a small hairline crack in it. It also needed a oil pump, which has been replaced. (PITA btw)

10/27/12
UPDATE!

Euro Grills

USDM Grills on the left and EDM grills on the right

Hella Euro Smiley Projector Headlights

Free Euro clock he threw in

Just placed on there, not mounted yet. I still need to paint the kidney's trim black.

I'll also be painting the trim rings on the Smilies black. I decided not to go with the black depo headlights like I originally planned because these have a much better output/cutoff.

**yahh** · 12-19-2012, 11:35 AM

Haven't posted here in a while but the build has gone in a completely different direction than before.

Hella Smiley's in. I was thinking about retrofitting with mini H1 projectors but i'm worried about the patterns in the glass. Might look into picking up a set of Bosch ones instead. Are the Depo ones worth retrofitting? They are considerably cheaper and come with brand new glass/acrylic whatever it is.

Morimoto Ballasts and XB35 Bulbs

Condor Speed Shop s50 Motor mounts and tranny

95 M3 Cosmo Black Parts Car for the S50

Planning on staying 4 Lug and selling the TE37's and getting 15" SSR Type C's as well as the RX7 brake upgrade.

Fog Lights pulled from a yard, just need to order the acrylic to replace the lens.

944 Booster. I also have the e36 oil pan, dipstick, and pickup tube laying around in a box. All I need is the throttle cable.

**yahh** · 12-28-2012, 03:03 PM

Came home to these

and my girlfriend wanted some HID's so I bought her a set from DDM for her '12 Mazda 3. They shouldn't be too bad as they have halogen projectors in there from the get go.

**yahh** · 01-17-2013, 08:05 AM

1-08-2013
Because you guys love pictures so much :P

I'll take many more when I pull the motor.

1-10-2013

Hankook Makeup Products?!?!

15x7 +38 SSR Type C 9lbs a piece!

Need to give them a good cleaning and should be good to go. I will be running adapters on them since my friend that I will be tracking with drives an 01 MR2 (undergoing a 2zz swap currently) which is 4 lug as well. That way we can share wheels if need be. The adapters will be something like 22mm rear to give a final offset of +15 in the rear and 18mm front to give +20 in the front.

Also went to town with the motor today.

Half way through

Near the end

Removed the radiator, AC condenser, all AC lines, fan shroud, overflow tank, windshield wiper reservoir, removed exhaust manifolds, and unplugged everything that needed to be unplugged as well as every vacuum line that was connected to the motor. All that's left is to loosen the motor and tranny mounts and separate the driveshaft at the guibo and lift her out.

Motor will be pulled tomorrow or Saturday hopefully and then have the s50 in by sunday/monday.

1-12-13

Got off at 4 and by 10:30 both motors and transmissions were out. Had my dad and my good friend Alan (mr2) helping me, it was a good time.

I kept forgetting to take pictures so I took them whenever we got snagged on something we couldn't get off or out. Anyways enjoy the pictures!

All out!

Then the M3 was in the way so we had to move it. (insert chain + truck = V)

Time for motor #2

Both out

Empty E30 bay!

M20 (E30 Motor)

Both Motors and where we stopped for the night.

1-14-14

Sorry for the cell pics but I got some more work done today. I got the entire front suspension/steering rack removed from the shell today so it can be sold.

^ That's another e30 back there btw haha. Currently working on fixing it to sell. Paid $400 for it and rebuilt the motor with new gaskets and she drives beautiful now. Just need a rear (convertible) window for it.

A picture I had on my phone that I took sunday morning after the motors were pulled.

**yahh** · 01-27-2013, 11:42 AM

1-20-12

Third set of wheels for the e30 are in the garage. TE37's are getting sold for sure now. The style 5's might get pc'd gloss black and im pretty sure i've decided on the color for the e30.

1-23-12

Bushings finally came in today and the spacers and bolts came in so I can swap to the E36 steering rack which is a 3 lock to turn rack. Much improved over the e30's. Also got the correct throttle cable to use.

From L to R
Top Row -Rear Trailing Arm Bushings, Rear Subframe mounts, Differential mount
Bottom Row- Steering Rack Swap, Offset differential studs/spacers/screw and M3 offset LCAB's

Throttle Cable

M3! :)

1-25-12

UUC Coated Stainless Steel brake lines and Clutch line. I also got a magnetic drain plug as the old one was pretty stripped.

1-26-12

Rear Strut bar came in =D

I love wrinkle black coating :)

**yahh** · 01-28-2013, 03:47 PM

Brake Pads came in today. Hawk HPS pads. From what I've read they're low dust, low squeal, and grip much better than stock but will definitely be a down grade from the Brembos I had on the 3G. These will be strictly street pads and maybe some light auto x. I will get a set of track pads when the time comes.

Announcement

yahh's 1986 325e S50+Recaro+BBS RS

yahh's 1986 325e S50+Recaro+BBS RS

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment