my e30: s50 w/6262 and a/c

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Mesarina
    replied
    splitter done..



    new clutch slave cylinder



    ready for some driving!



    ran with a Seat Leon, e30 1 Seat 0



    I was still loosing clutch pressure, changed my master cylinder too.. problem solved..

    Leave a comment:


  • Mesarina
    replied
    bought an used compressor..



    modifying my a/c lines..



    raced an e46 m3, gutted interior, about 320whp, map tuned... walked away from me, should have swapped an ls engine... :hitler:

    Leave a comment:


  • Mesarina
    replied
    one day was raining, and I hit a rock the size of a torque converter, didn't cracked my oil pan, buy bye bye splitter, and one rim received the hit, so I borrowed a ronal turbo from the same friend to get home, I kinda like that look







    repaired... like nothing happened...



    painted my spolier... I need to paint my front balance too..



    splitter in the making..

    Leave a comment:


  • Mesarina
    replied
    had to trim the 318is harness cover...



    and cleaned the engine







    then I bought a mishimoto intake tube





    got an used tensioner for my a/c... the stock one was cracked..



    Leave a comment:


  • Mesarina
    replied
    then I borrowed a s2.79 from a friend, swapped out my open 4.10..

    Leave a comment:


  • Mesarina
    replied
    guess I can use this now?

    Leave a comment:


  • Mesarina
    replied
    here are some pics of my exhaust setup...





    Leave a comment:


  • eduTechnic
    replied
    Sweet man! Been great to follow this build, and see some Centro 'Merica

    Leave a comment:


  • ngampleh
    replied
    congrats buddy... :D

    Leave a comment:


  • Mesarina
    replied
    yesterday's progress...

    wiring harness





    ecu in place



    shifter installed



    getting there..



    cover in place







    testing the cover, do you guys have to trim the cover like I need to?









    enough clearance for another fan if I need to..


    e21 trans mounts in place, (the bolts on the guibo where changed after the pic)





    ss brake lines









    its alive!



    bought another termostat housing



    finally on the floor



    m42 a/c compressor at the side before I get an e36 one..



    and out we go! I managed to do the swap in two days



    oil pan clearance



    finally i can burn both tires without lsd...

    Leave a comment:


  • Mesarina
    replied
    removing the m42





    my wife's touch up





    rainy day here..



















    s50 in place!







    so close

















    all this was done in one day!

    Leave a comment:


  • Mesarina
    replied
    sandblasted both subframes..



    painted front subframe



    steering rack spacers installed





    steering rack in place




    time to change the oil pan



    threadlocker in the oil pump shaft



    e36 oil pickup



    e34 m50 oil pan



    difference in oil pans



    removed the oil pickup



    subframe in place





    last trip with the m42...





    Leave a comment:


  • Mesarina
    replied


    homemade steering rack spacers..



    I was sick of the rotten exhaust on my m42, so I dediced to change it, to see if it made a difference...





    2.5" exhaust







    Leave a comment:


  • purebmw
    replied
    Nice work buddy! clean work!

    Leave a comment:


  • Mesarina
    replied
    everything went better than expected, make the holes cleaner, but didn't too any pics





    reinforced the front subframe



    slotted the holes to make it easier to tightnen the engine mount bolts











    Leave a comment:

Working...