85 Euro 320i Tranforms (Hartge H35) + H bomb

[e30m3s54turbo]

Hi Raul, you might be able to ID this model (looks genuine= but is a made in Japan Hartge wheel seems. They are 15x7 ET25 4x100. It's for sale locally.

Yes, it's in horrible condition but I guess it can be restored with great look at the end. However, besides missing bolts, tire valve and some bends, what caught my eyes was the "welded" barrel where tires goes on. Would be this genuine or maybe somone modded these wheels and added a extender "outer" barrel for extra lip or something else...

-Diego

Hello Diego.
Hartge Japan wheels are not at value able as OZ 3pc. Not sure why they are made as a 2pc wheel????
My buddy Frank bought some for $1000 plus. Here is a pic.

DSC03233 by Raul Salinas, on Flickr
DSC03236 by Raul Salinas, on Flickr

[Roadwolf]

Oooops I'm so sorry dear friend.

I did not post a new message, I wanted to recover photos lost in my first post (P.18 ). I'm sorry, I change it on P.28.
I will inform you for your questions.

Regards

[diegom6]

Hi Raul, you might be able to ID this model (looks genuine= but is a made in Japan Hartge wheel seems. They are 15x7 ET25 4x100. It's for sale locally.

Yes, it's in horrible condition but I guess it can be restored with great look at the end. However, besides missing bolts, tire valve and some bends, what caught my eyes was the "welded" barrel where tires goes on. Would be this genuine or maybe somone modded these wheels and added a extender "outer" barrel for extra lip or something else...











-Diego

[e30m3s54turbo]

Hello.
I see you must doing good.

I do need your help on your head light wiper system from your Touring ix.
You can email me pics of your water lines on your system. You can post pics on my project Hartge H35 build or my Alpina B6 3.5 turbo build.

http://www.r3vlimited.com/board/showthread.php?t=227993&page=44

Thanks you!!!!

[Roadwolf]

Hello Raul !

In your catalog, which you use to shock absorbers "H27X Touring" or "H27 Touring"?
I would buy new shock absorbers.

Is what the knob "Hartge" is the same as BMW?
I bought next to you:



(#post modified#18-6-2015)

[2002jm]

thanks for the link

Thanks for the information. You are right, he is not cheap:). Will be looking for a used set if you come across one:)
thanks,
jm

[e30m3s54turbo]

I found them on eBay. I emailed you where to buy new ones from Micheal Paul Weber. He is not cheap$$$$

[2002jm]

I bought a other set of Hartge struts and shocks. The Hartge struts are 51mm.

DSC04313 by Raul Salinas, on Flickr
DSC04312 by Raul Salinas, on Flickr

Man; where do you find all these parts:)?????
very nice set, 51mm is the size for my car too.
jm

[e30m3s54turbo]

I bought a other set of Hartge struts and shocks. The Hartge struts are 51mm.

DSC04313 by Raul Salinas, on Flickr
DSC04312 by Raul Salinas, on Flickr

[2002jm]

:)

The part numbers say it fits 318i, 320i and 323i.

Yes, I think that was the set we almost bid against each other on ebay. :)
I thought they only would fit 318/320 according to the seller???
Good job getting those, they are supper rare:)
jm

[e30m3s54turbo]

The part numbers say it fits 318i, 320i and 323i.

[2002jm]

On my old 1984 Hartge H26. It was a 323i block, 323i crank, Hartge custom piston and rods. The horse power was 193hp.
My car is an 85, not sure if that means anything, but it says 2.7 on the side of the block. Will look for more numbers....Would the 2.7 have more hp, or just more torque?
jm

I found 2 sets of Hartge struts and shocks. I ran the part numbers before I bought them. One set came in.
That is good that you found two, maybe you can sell one to me:)
jm

DSC04257 by m3raul, on Flickr
DSC04258 by m3raul, on Flickr
DSC04259 by m3raul, on Flickr

[2mAn]

Raul, you need to clean out your inbox... Just went through the entire thread. Truly a solid catalog for Hartge stuff.

[e30m3s54turbo]

Raul: So in the h26 if they made it a 2.7 then hartge guys replaced the crank and the pistons? The normal block would have been the 2.3 I believe.
jm

On my old 1984 Hartge H26. It was a 323i block, 323i crank, Hartge custom piston and rods. The horse power was 193hp.

I found 2 sets of Hartge struts and shocks. I ran the part numbers before I bought them. One set came in.

DSC04257 by m3raul, on Flickr
DSC04258 by m3raul, on Flickr
DSC04259 by m3raul, on Flickr

[2002jm]

h26 engine

Raul: So in the h26 if they made it a 2.7 then hartge guys replaced the crank and the pistons? The normal block would have been the 2.3 I believe.
jm