85 Euro 320i Tranforms (Hartge H35) + H bomb

[2002jm]

Thanks guys.

Here is a pic of Hartge mats for John M (2002jm)

image by m3raul, on Flickr

Looks good, I just need those in black and would look so good in the h26:)
thanks Raul,
jm

[Der Ruffian]

Raul.
Do you know which crank, pistons and rods were used for the H35 engines??

[e30m3s54turbo]

Raul.
Do you know which crank, pistons and rods were used for the H35 engines??

The crank and rods were stock. The piston were Mahle Gmbh. The compression was 10:1. I will take some pics later of early H35 250hp. Later H35 were 240hp.
Most of the power came from Hartge head. Like Hartge cam, 2mm bigger valves, ported head and Hartge H35 headers.
I have a Hartge head. My buddy Frank has new never used H35 motor.

[Der Ruffian]

Thanks Raul.
☺

[2002jm]

h26 engine

Raul: So in the h26 if they made it a 2.7 then hartge guys replaced the crank and the pistons? The normal block would have been the 2.3 I believe.
jm

[e30m3s54turbo]

Raul: So in the h26 if they made it a 2.7 then hartge guys replaced the crank and the pistons? The normal block would have been the 2.3 I believe.
jm

On my old 1984 Hartge H26. It was a 323i block, 323i crank, Hartge custom piston and rods. The horse power was 193hp.

I found 2 sets of Hartge struts and shocks. I ran the part numbers before I bought them. One set came in.

DSC04257 by m3raul, on Flickr
DSC04258 by m3raul, on Flickr
DSC04259 by m3raul, on Flickr

[2mAn]

Raul, you need to clean out your inbox... Just went through the entire thread. Truly a solid catalog for Hartge stuff.

[2002jm]

On my old 1984 Hartge H26. It was a 323i block, 323i crank, Hartge custom piston and rods. The horse power was 193hp.
My car is an 85, not sure if that means anything, but it says 2.7 on the side of the block. Will look for more numbers....Would the 2.7 have more hp, or just more torque?
jm

I found 2 sets of Hartge struts and shocks. I ran the part numbers before I bought them. One set came in.
That is good that you found two, maybe you can sell one to me:)
jm

DSC04257 by m3raul, on Flickr
DSC04258 by m3raul, on Flickr
DSC04259 by m3raul, on Flickr

[e30m3s54turbo]

The part numbers say it fits 318i, 320i and 323i.

[2002jm]

:)

The part numbers say it fits 318i, 320i and 323i.

Yes, I think that was the set we almost bid against each other on ebay. :)
I thought they only would fit 318/320 according to the seller???
Good job getting those, they are supper rare:)
jm

[e30m3s54turbo]

I bought a other set of Hartge struts and shocks. The Hartge struts are 51mm.

DSC04313 by Raul Salinas, on Flickr
DSC04312 by Raul Salinas, on Flickr

[2002jm]

I bought a other set of Hartge struts and shocks. The Hartge struts are 51mm.

DSC04313 by Raul Salinas, on Flickr
DSC04312 by Raul Salinas, on Flickr

Man; where do you find all these parts:)?????
very nice set, 51mm is the size for my car too.
jm

[e30m3s54turbo]

I found them on eBay. I emailed you where to buy new ones from Micheal Paul Weber. He is not cheap$$$$

[2002jm]

thanks for the link

Thanks for the information. You are right, he is not cheap:). Will be looking for a used set if you come across one:)
thanks,
jm

[Roadwolf]

Hello Raul !

In your catalog, which you use to shock absorbers "H27X Touring" or "H27 Touring"?
I would buy new shock absorbers.

Is what the knob "Hartge" is the same as BMW?
I bought next to you:



(#post modified#18-6-2015)