Well small update
decided to sell the S38B38 after complete rebuild http://alpina.123.is/photoalbums/251991/
i had bought a 750 with a fellow and me and my buddy split the car,, i got the V12 M70B50 drivetrain etc ,, he parted the car
I wanted the engine to be as good as possible,, i am a fan of V12 ,, Bmw and thats it
so i took the engine apart aaaaaaaand, let the show begin...
new waterpump,,+ 2 set of pulleys +wheel
all gaskets,,VICTOR REINZ or OEM..
All bolts/nuts new.. except crank rod+ camshaft
not like brandnew,,,,,,,,,
no way back.......
new bearings,, main + conrod
just an useless info Conrod bearings are ONLY by BMW and cost a fortune
cylinderhead refurb
Sv.H-Motorsport solution,, made by Max Lumens and imported by FATANDRE idea maker
this is a genius solution if/possible replacement for oem intake gaskets,, you use the oem,, but these are 3mm thick precise cut out of silicone and goes to head and under intake manifold((oem cost the same as a week holiday on a beach))
M40/M70 camshaft timing
Oilpan,, upper
exhaust manifolds were sandblasted and the heat shields........ CHROME :shock: :shock: got lost in Vanity
Most parts were sandblasted and powdercoated,,
lower oilpan and valvecover are black ,,all other parts shadow-silver-chrome ???
M70B50,,,,,,, 500 horsepower look
the white color is painted
/// stripes is mine/stolen idea the chrome stripes are mine idea,, this is all foil
The engine will be running on MegaSquirt standalone
Regards
decided to sell the S38B38 after complete rebuild http://alpina.123.is/photoalbums/251991/
i had bought a 750 with a fellow and me and my buddy split the car,, i got the V12 M70B50 drivetrain etc ,, he parted the car
I wanted the engine to be as good as possible,, i am a fan of V12 ,, Bmw and thats it
so i took the engine apart aaaaaaaand, let the show begin...
new waterpump,,+ 2 set of pulleys +wheel
all gaskets,,VICTOR REINZ or OEM..
All bolts/nuts new.. except crank rod+ camshaft
not like brandnew,,,,,,,,,
no way back.......
new bearings,, main + conrod
just an useless info Conrod bearings are ONLY by BMW and cost a fortune
cylinderhead refurb
Sv.H-Motorsport solution,, made by Max Lumens and imported by FATANDRE idea maker
this is a genius solution if/possible replacement for oem intake gaskets,, you use the oem,, but these are 3mm thick precise cut out of silicone and goes to head and under intake manifold((oem cost the same as a week holiday on a beach))
M40/M70 camshaft timing
Oilpan,, upper
exhaust manifolds were sandblasted and the heat shields........ CHROME :shock: :shock: got lost in Vanity
Most parts were sandblasted and powdercoated,,
lower oilpan and valvecover are black ,,all other parts shadow-silver-chrome ???
M70B50,,,,,,, 500 horsepower look
the white color is painted
/// stripes is mine/stolen idea the chrome stripes are mine idea,, this is all foil
The engine will be running on MegaSquirt standalone
Regards
Comment