My euro 320i/B6 3.5 Alpina Tribute ( Now with turbo power)

[ThatOneEuroE30]

think I managed to find a 3.25LSD will see when it arrives got it from a wrecking yard in Portland Oregon

fuckers sent me a 3.73 which i already have in it! hopefully can return it and get that money to find a 3.25

[ThatOneEuroE30]

I remember you mentioned that you used some sort of adapter or something for the wiring harness? Couldn't find the page where you mentioned it. If you could shed some light on m30 swap wiring that'd be great.


Sent from my iPhone using Tapatalk

I made an adapter to make the round c101 plug into the the square c101 all i did was look at the pin outs of each and connect each wire to its corresponding pin from each side and what ever was left in the round one that wasn’t used in the square one was cut flush with the plug.

[wworm]

I remember you mentioned that you used some sort of adapter or something for the wiring harness? Couldn't find the page where you mentioned it. If you could shed some light on m30 swap wiring that'd be great.


Sent from my iPhone using Tapatalk

[ThatOneEuroE30]

Just spent the past two days going through this whole thread. Man you encountered some problems. Totally worth it. This car is incredible. Props man!


Sent from my iPhone using Tapatalk

Thanks man much appreciated.

[wworm]

Just spent the past two days going through this whole thread. Man you encountered some problems. Totally worth it. This car is incredible. Props man!


Sent from my iPhone using Tapatalk

[ThatOneEuroE30]

think I managed to find a 3.25LSD will see when it arrives got it from a wrecking yard in Portland Oregon

[e30m3s54turbo]

Nice!!!!!

[ThatOneEuroE30]

I just can’t stop driving this thing. Really do need a 3.25 so if anyone has one. Please let me know!

[ThatOneEuroE30]

Went and got an alignment done today and also re routed the cooling system so now I have heat! I noticed the other night when I was driving back from dinner my cluster only lights up on one half. I check bulbs they are fine and was talking with Bavarian restoration and said they likely think its a short in the circuit board. I will check that there is power going to the light to confirm this. They can also make a near perfect replica of the alpina clusters so if its bad sometime over winter i will send them the cluster to have it converted to an alpina. Really need to get a 3.25 diff also.

[ThatOneEuroE30]

Slam it until cow catcher breaks off����

Lol absolutely not.

[e30m3s54turbo]

Slam it until cow catcher breaks off����

[ThatOneEuroE30]

I like it a lot. I think it needs a bit more low all around, but that's just me. I do like the meaty, aggressive look it gives off...and if it was slightly lower (not slammed by any means), I think it would be dead on. Nice job!

I'd agree on a bit more low front and back, but it is a beauty!

I need to re route the center part of the exhaust to go any lower. Which i probably will do. Right now though I’m driving it and then the first thing this spring is gearing it down. 3.73 is way to much for the high way driving it needs a 3.25 asap.

[MR E30 325is]

I'd agree on a bit more low front and back, but it is a beauty!

[e30austin]

I like it a lot. I think it needs a bit more low all around, but that's just me. I do like the meaty, aggressive look it gives off...and if it was slightly lower (not slammed by any means), I think it would be dead on. Nice job!

[ThatOneEuroE30]

YESSSSSSS.

Get some sun on that paint :-)

you doing the stripe kit at some point? yellow or gold? white?

undecided To be honest i want to but dont want to ruin paint cause once its on. It cant come off or i will likely take paint with it