My euro 320i/B6 3.5 Alpina Tribute ( Now with turbo power)

[ThatOneEuroE30]

It still needs some work, but hopefully it sits better on the trunk for you. Good seeing you man :)

Yes it needs a little to be ready for paint but it's ALOT better then it was. Good seeing you to man.

[DIIRTY-30]

This looks so good.. Cant wait to see the outcome once you get to it man.

[ThatOneEuroE30]

Thanks man hopefully soon. finishing up the body work over the week. I'm hoping to get it in paint in the next week or two

[kingston]

Sweet!!

[IronFreak]

Do your homework on the triple disc. you have a lot of design and machine work ahead of you to do that.

[ThatOneEuroE30]

Do your homework on the triple disc. you have a lot of design and machine work ahead of you to do that.

I actually spent the day talking to Otis and mike. Doing a twin disc instead. Gonna get 7.25 10x29 tilton disc and then a tilton twin disc pressure plate. I know the pressure plate I need. Just waiting on mike to send me the part number for disc he has.

[IronFreak]

I actually spent the day talking to Otis and mike. Doing a twin disc instead. Gonna get 7.25 10x29 tilton disc and then a tilton twin disc pressure plate. I know the pressure plate I need. Just waiting on mike to send me the part number for disc he has.

There is more to it than that, trust me. I tried my damnedest to get that euro flywheel to work on the m20 but the center bore was to big. these clutches don't sit flush against the flywheel, they're recessed. which means you have to machine a lip into the surface of your flywheel even more to apply the correct surface pressure when tightened down. Nothing against Otis and mike, but they bought that, I built mine, I went through a lot of headaches figuring out what would and wouldn't work. in the end for the m20 I had to buy a flywheel because nothing factory would work.

Do you research, machining will add up, I know a place that sells a m10 billet chromoly flywheel already designed for a tilton 7.25" clutch.

Edit: Let me clarify this is using a step lip clutch. you can do a POT style, but finding a used one is next to impossible as must of the big race teams that have to cycle there parts are step clutches to be used with ultra light flywheels, or button flywheels.

[IronFreak]

Nevermind, the flywheel is for OE clutch.

[IronFreak]

feel free to come look at mine and how it goes together, you'll have a much better understanding of what I'm talking about.

[ThatOneEuroE30]

My euro 320i complete restoration.(now with m30power)

Will be doing that Ross.



Not an update on the car. Per say. But I crated up and m30b35 for Steve @ Blunttech shipping it Friday.

[blunttech]

Thanks for all your help Brandon Much appreciated..... Just so you know that thing can be dropped off anytime as long as the bill of lading is complete

[ThatOneEuroE30]

My euro 320i complete restoration.(now with m30power)

Thanks for all your help Brandon Much appreciated..... Just so you know that thing can be dropped off anytime as long as the bill of lading is complete

Ah okay I did not know that if I have time tomorrow I will.and no problem man any time

[ThatOneEuroE30]

Not much to update. Put the fenders and seam sealed/ por-15 everything i replaced. decided to roll my fenders before paint. Now my dads finishing his sanding and then she will be off to paint my dad hopes to be finished by tomorrow night so i could be in the booth by the end of the week or early next.





gotta start sanding down my zender wing to get it ready for paint aswell. Probably will have my wing and alpina valance painted at the same time separate from the body since I dont have the wing ready yet and dont even own the valance yet.

[ThatOneEuroE30]

Car goes into the booth Friday hopefully. Waiting to hear back from my painter to see if we can get it in then.

[e30m3s54turbo]

:nice: