Taco's hopes and mostly dreams.

[TheTacoMan]

Did you removed the primer from your bmw fenders? If not you really should have bmw just sprays a shitty Eco primer on them so they don't rust to get a good finish you gotta sand that shit off to bare metal take the metal to 180 grit then prime it. Wet sand then lay your color.

I sanded them down with 200 then filler primer which was sanded again, cleaned and began the actual paint.

Are you running EBC? Looking at your WG there.

No ebc, just a mbc. Hallman boost controller I think.

[ThatOneEuroE30]

Did you removed the primer from your bmw fenders? If not you really should have bmw just sprays a shitty Eco primer on them so they don't rust to get a good finish you gotta sand that shit off to bare metal take the metal to 180 grit then prime it. Wet sand then lay your color.

[ak-]

Are you running EBC? Looking at your WG there.

[unloadedak]

did you use a primer or something to change the fact that the quarters are white and the fenders are black?


idk much about paint. just a thought.

[TheTacoMan]

Front looks off, no wet sanding polish or wax has be done.

[JasonBates]

That's looking pretty awesome.

[TheTacoMan]

Nah, thats alot of work

[ThatOneEuroE30]

I thought you were blending the quarters in?

this

[unloadedak]

I thought you were blending the quarters in?

[Ether-D]

Really looking good bro.

[TheTacoMan]

Cars, yes.

[efficient]

This your first time doing paint?

[TheTacoMan]

Oem Rattle cans :)
First started wet sanding, 2000 grit then 1500 in some rough areas. Did this for about 3 hours then begain polishing. This is with no wax.

Almost done.

[MyE30]

Looking good. What are you using for painting?

[TheTacoMan]

It will be, also began painting it. Car is dusty, this is the first stage, wet sanding, polishing then wax to follow.