Is that my hardtop I see? Hah, sorry I haven't had time to come down and pick it up.
Announcement
Collapse
No announcement yet.
Wishno's E30 DD project thread V.2
Collapse
X
-
Originally posted by thenewguy View PostIs that my hardtop I see? Hah, sorry I haven't had time to come down and pick it up.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
-
So I'm getting ready to install a rebuilt vanos and associated tensioners, chain guides and spring plates. While I'm in there I'm also doing S50 cams. My question to you guys is if I have pink top 21lb injectors would it hurt to throw them in? I know they won't be used to their full potential but would it be worthwhile?Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
-
Forgot to post these pics last summer and just recently found them. So have at it!
Got all the stuff out.
Pulling the rad.
Had a friend come by to help with the cams/timing
The old vanos unit.
Chop!
Pulling the old cams
New cams in. My friend who was taking pictures for me had to leave so thats all I have. Everything went well though and I drove it home a few hours later.
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
-
Wishno's E30 DD project thread V.2
Correct. It holds down all the bearings caps so you can loosen them
You can also remove the cam without it by rotating the cam to a sweet spot where only the cylinder 1 springs are compressed, then removing all the caps except cyl 1 and then slowly loosening the cyl 1 capLast edited by pandaboo911; 04-14-2015, 11:56 PM.
Comment
-
Originally posted by KI4UJO View PostDid you build that cam tool?
You don't really need it to remove cams but it's nice to have when putting them back in.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
Comment