Hahaha ummmm sooo..
I used a distribution block for earthing purposes. My motor was also earthed to this same distribution block.
A starter motor's earth is the engine block, which then went through the engine earth and back into this distribution block, this would be fine, if my distribution block was actually earthed! so the result was it was backfeeding all my earths with 12v and not properly earthing the starter motor so hense no crank.
So all i had to do was earth this distribution block. So as soon as the starter motor found an actual earth everything was fine.
So the funny part is I mounted this 'Earth distribution block' thinking 'now everything I plug into this block will now be an earth. which is the case, if you earth the stupid thing to the chassis! =(
Thankfully this was only 1 to 2 nights of stuffing around and not more!
I used a distribution block for earthing purposes. My motor was also earthed to this same distribution block.
A starter motor's earth is the engine block, which then went through the engine earth and back into this distribution block, this would be fine, if my distribution block was actually earthed! so the result was it was backfeeding all my earths with 12v and not properly earthing the starter motor so hense no crank.
So all i had to do was earth this distribution block. So as soon as the starter motor found an actual earth everything was fine.
So the funny part is I mounted this 'Earth distribution block' thinking 'now everything I plug into this block will now be an earth. which is the case, if you earth the stupid thing to the chassis! =(
Thankfully this was only 1 to 2 nights of stuffing around and not more!
Comment