Bronzit E30 - OBDII S52 shaved bay - weekend/autox toy - Journey

[wworm]

gotta love a good golden
..or bronzit..

[Sh3rpak!ng]

Built some indestructible low profile ramps. Way over engineered and certainly didnt need to weld every single joint, but wanted the practice. Finally ran out of wire after I laid the last weld. I've been on this same spool since I bought the welder. Car kinda looks cool without the bumper, grills and fan. Had my favorite 4 legged fan visit for the evening. She hangs around watching and occassionally steals parts of the car to get my attention. Test fitted the cage a few more times. Had to bend the rear pads to fit the contour of the wheel well. Marked harness mount locations and roll bar mount locations so I can start drilling for installation. Sent from my SM-G960U using Tapatalk

[Sh3rpak!ng]

I'd buy some of those radiator shrouds if you could extend them down a bit. I have the stock pieces in the car but I am using "racer tape" around my oil cooler. Would basically need it to go straight down to the end of the valance and I can cut the rest from there.

I could probably make another set. Haven't even mounted these yet so prime time to make a master template. PM me.

i'd be down for rad shrouds as well. been meaning to do that eventually but probably won't turn out as good as my cardboard designs are still novice.

lol practive makes perfect... let's see how the first set come out for digitalwave

Love it

[jeenyus]

Love it

[s14brent]

i'd be down for rad shrouds as well. been meaning to do that eventually but probably won't turn out as good as my cardboard designs are still novice.