Beautiful!
Announcement
Collapse
No announcement yet.
E30 Street/TimeAttack (+ E36 V8 Turbo Touring)
Collapse
X
-
Originally posted by Miuge View PostGreat to hear that :) You should try click faster this time.
Besides bodywork sketching I finally welded turbo manifold together, still needs wastegate piping and coating:
Comment
-
Subscribed. AMAZING!How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
Thank you!
Recently I've machined and bought some new stuff.
Current engine mounts were kind of temporary, never welded them complete, because turbo and supercharger locations were only approximate.
I wanted a lower design to clear the turbo intake pipe.
The design, steel sleeve with delrin bushing:
This was something I could machine by myself :nice:
Obviously I had to mockup alternator location before making intake/charge air piping, but the old one had seen it's best days. Instead of refurbishing and machining new pulleys for the old one I bought a new, smaller, modern alternator:
This spring and summer will probably be busy time with the project, more parts is already on the way ;D
Comment
-
That turbo manifold is a work of art.
Comment
-
This will be a frustrating and time-consuming job :drink: 1 out of 4 corners in progress, after spraying a paint layer I noticed one spot needed to be cut open and hammered down.
Finally got all the parts for the control arms, roll-center/bump steer -adapter fits perfectly ;D
Also few lengths of aluminium tubing appeared this week, need to build up something of those
Comment
-
Sub'd:DYour signature picture has been removed since it contained the Photobucket "upgrade your account" image.
If you have bought items from me, please leave feedback below.
If you are a BUYER, Check My Feedback.:up:
http://www.r3vlimited.com/board/showthread.php?t=183860
Check out my Euro Build Thread
http://www.r3vlimited.com/board/showthread.php?t=215557
Comment
-
Good to see some new subscribers! :up:
Earlier this week I bought few liters of paint, should be plenty for mock-ups and molds. I picked the same hue which might be the final color, we'll see...
At this point the fender starts to look like something, but still a lot to do. A couple of bigger dents showed up after the first gray paint layer.
But... this will probably do, picture taken this evening. I'm afraid something goes wrong when I start to mess up with fiberglass :D
I think I should take the camera more often with me, mobile pics look crap besides these..
Comment
Comment