I think what's going to give you trouble is the trunk lid. You cut basically all the way up to it, so any sloped flare won't really work unless you try to blend it into the trunk lid as well. I'm curious to see what you end up doing.
Announcement
Collapse
No announcement yet.
1970 2002 Factory Restoration
Collapse
X
-
Wow.......Sveinbjörn Hrafnsson
E30 CABRIO V12 M70B50 ///
ALPINA B10 BITURBO 346 @ 507
E34 550 V12 JML
Finnish wisdom : If you want to Win,, hire a Finn
http://alpina.123.is/pictures/
Comment
-
Subscribed.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
Last edited by knuklehead92; 09-28-2015, 07:47 PM.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Trust me it stock :yawn:
Comment
-
massive update
in a nut shell.....
the
car
is done....
but i still got to tiddy up some things
-windshield nozzles not installed
-install passenger door window
-install door seals
-figure out the rattling from the doors.
-Va state inspection which i will have it ready to pass
-install stiffer springs currently the car has 400 front and 325 rear but ill explain more why i am changing these.
-clean up the wiring inside
-eventually get the electronic power steering to work
-enjoy the car for the 2016 race season
First auto x Feb 28 NASA event at VMP
On Feb 20th I went to my favorite shop PTuning in Manassas,VA for a corner balance and 4 wheel alignment
the final result for my corner balance with a 200 lbs ballast for driver
LF 703 lbs RF 636 lbs
LR 727 lbs RR 664 lbs
Cross 49.93%
Car weight w/o driver 2530
Car weight w/ driver 2730
the car has 49/51 weight distribution which caught my off guard. I really wasn't expecting that.
The car also surprised me with the weight.... I was really hoping to be at the 2000-2300 mark.
But I think I can figure out how to shed more weight my ideas are
-rear lexan windshield
-rear quarter windows lexan
-driver and passenger windows lexan
-Fiber glass hood and trunk
-light weight battery
-aluminum front fenders?
- lighter wheels? lol idk
These are my alignment specs
Front Right Left
Caster 5.8 5.8
Camber -2.7 -2.7
Toe 0 0
Rear
Camber -2.4 -2.4
Toe 1/16" 1/16"
onto the pics....
ill get more pics later, stay tuned :)Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Trust me it stock :yawn:
Comment
-
Jesus playing just the tip with those images aren't you1989 325i LS Swap (Money Pit):https://www.r3vlimited.com/board/sho...d.php?t=244933
COTM Feb 2019: https://www.r3vlimited.com/board/sho...d.php?t=428404
Comment
Comment