Dumb questions thread!

[HerbE30]

This thread is for my questions. I really hate to clutter with multiple threads that already have similar content. I assumed the forum wouldn't hate me if I kept all of my 'dumb' questions in one place.

Can I use MAF cleaner to clean the IVC?

When converting to e46 hubs, what is everyone using to reduce acriment angle? I am planning on running BCs for the new year and wanted to make sure I wouldn't have any "Why did I use the 4x100 hubs?!?!" moments. I am perfectly content with the brake options available with the 4x100, so aside from that, what would be other advantages? I plan on using e30 offset CAB, but flipped so I don't have tons of caster. Am I correct?

I also have a slight stumble, below 1.5k and above 5k. I will be cleaning MAF, adjusting valves, changing plugs, fuel filter, and coolant temp sensor? Any other leads will be looked into. The car was advertised with a JC chip, and with most CL adds, I assume it was a lie. Should I pull the 1.3 apart and check? Can this cause a stumble on 89 octane, as the JC required 93?


P.S. I do use the search function, frequently. If I am asking, the importation I find may be lacking, or I am looking for more feedback.

Stay tuned for the questions that shouldn't have been asked!

[iwantspeed]

just use any regular carb spray for the icv

no comment on the e46 question

for the stumble
first replace all the sources of a vaccum leak

then replace the ignition system
cap
rotor
plug wires
spark plugs
coil

still stumbles try replacing for a crank positon sensor from the actual dealership it comes with a metal housing.

[TobyB]

reduce acriment angle?

Why, any acriment angle reducer will work, of course-
don't spend more for BMW reducer.
I like it in cream form, myself....

I had to Gargle it-

http://www.srtforums.com/forums/f163/turning-radius-help-205153/

Ackerman, you mean?
The hubs themselves won't affect Ackerman, only track width, and thus, scrub radius.
I never saw any reason to go to 5 lugs, but then, I am not a stretched poked wheel whore...

t

[HerbE30]

@iwantspeed - There were some fairly large cracks in the intake boot post MAF. So I am hoping that is my issue. Will be ordering one soon. Still planning on a small tune-up though. I also cleaned the MAF really well. I removed and cleaned the CPS, I thought it had abrasions on it, but it was just gunk.

@TobyB - I realized my spelling was off when I tried to google answers... haha. Thanks!
I guess people would value 5x120 over 4x100 when looking for large authentic wheels at the required sizes..

I realize the 5 lug swap doesn't add akerman (;D). I was trying to say (but I was at the job):
My plans are to run e46 control arms with e34 tie rod parts. So I would have the camber and a wider track.. But wouldn't I still be needing something to correct akerman? Or I guess I should say, reduce akerman for more skids?

[Jaker]

Ackermann can certainly be impacted by a hub change. If the steering arms cast into the hubs are different at all, chances are the Ackermann will change as well.

https://en.wikipedia.org/wiki/Ackermann_steering_geometry

[Das Delfin]

love how this was moved to members rides. Sick burn, admins

[efficient]

How long are coolant hoses supposed to last?
I replaced all my coolant hoses in 2014. One of them just burst.

[ELVA164]

How long are coolant hoses supposed to last?
I replaced all my coolant hoses in 2014. One of them just burst.

10 years I think is the recommended replacement interval, so something was wrong with either the hose itself, the installation, or the cooling system.

[Jb325is]

Well with e46 arms, the only angle that matters is, like, angle bruh.