What did you do to your E30 today?

[Jand3rson]

I put my front bumper, headlights, grills, kidneys and hood back on. Man, was that a great feeling. My car looks like a car again!

[jw 325ic]

replaced my driveshaft (with a toasted rear ujoint) with a backup driveshaft with both toasted ujoints and still no 2nd gear. ugh...still better than an e36

[noE30]

Finished tearing it down for a rear end refresh, dropped subframe and diff today. My e30 is getting new IE trailing arm bushings, IE strut mounts, new OEM diff mount, subframe mounts, and rear wheel bearings.

[u3b3rg33k]

Put my (new) MAF (back) in.

[JubJub]

My interior went from taurusrot to firethorn-red... after 8 cans of DupliColor hp107. Very Close to Cardinal..

You haz pictures?

[Charley]

Swapped the H&R sports+Bilsteins from the 4lug strut to the 5 lugged one.
Switched the hats for some e90 one as well.

[Rustyduktape]

Cleaned all the brake dust and other shit off all 5 wheels, cleaned the spare wheel well and patched a leak in the metal with some fiberglass. the hole looked like the previous owner had backed into something. spray painted it with some underspray, looks new again. Changed the oil and the oil filter, and fixed the leak in my antenna, which needs to be replaced. Detailed her and gave her a nice wash. Absolutely loving owning an E30, it's under my skin now, haha.

[CHIF8008]

drove her to class and back. she needs a wash

[e30-325]

finally got around to doing the LR wheel bearing. start to finish took me 30-45 mins :mrgreen:

[ruqknuf]

Installed a 3.46 lsd and new guibo today - best upgrade yet !

[Cong405]

I now have ac!!!!

[u3b3rg33k]

Fixed window carrier with WSSSRP (window screen & steel strapping reinforced polymer, aka epoxy).

[Jand3rson]

Put the front speaker panels back in, as well as the knee bolster under the dash, my steering wheel, ebrake console, battery cover in the trunk, and put my centercaps on my wheels (still trying to come up with a good centercap design).

As soon as my new Magnaflow gets here this week, the car goes down to the exhaust shop to have everything welded up.

[ck_taft325is]

I scraped the fuck out of my stock I exhaust. Yeah.

[dr.strangelove]

worked on the M3 from 2pm till about midnight. shaved off brackets in engine bay, got some bits ready for powdercoat, revised the mounting of the MS2 in the eta case, finished extending the wiring for the brake fluid reservoir relocation, and started to mock up the placement for the coil(s) bracket location.

in the next couple of days i will be finishing up the wiring of the override switch for fan control (through MS2), wire up the g.g. a/f gauge, bleed the brakes, and slowly but surely finish this thing.