Empty pockets and lazy

[E30SPDFRK]

It wasn't even the engine this time. I tried extracting the bolts as I really don't want to weld the subframe up, but I broke 3 of my extractors off inside the bolts. I can't even drill them out easily now :(

I did find that BMW made holes in the tops of the frame rails though right above where the bolts would come through, so I'm just going to weld some nuts up there and use longer bolts.

[RickSloan]

some one needs to please beat this curse...

[Jean]

Hmmm.subscribed.

[E30SPDFRK]

Too tired for a big update, but it's not going to Limerock. :(

The m30 curse strikes again. Feel free to say I told you so, Rick. lol.

I'll update when I get back on Tuesday.

[RickSloan]

you actually compress the pressure plate to install? just tighten in a pattern a bit at a time and you should be ok. unless you have a very serious clutch going in?

[FredK]

Clutch disc alignment tool? You can use the transmission input shaft to align the splines. It ain't pretty, but in a pinch, it works.

How did you get the bolts out?

[Paukert11]

I'm not going to be driving this car far enough to worry about gas prices, and even if I do I'm sure the 2.93 will help me out. I almost diddnt even do this today- I was going to go to NY with Alex to look at a 911, but the guy never picked up his phone.
Now all we need to do is find you an s42 to put in your car.

i know some one who has one laying around/.

[E30SPDFRK]

I don't know the actual name for it. It engages the pressure plate so you can line the disk up and torque the bolts down evenly.

[yert315]

preloader tool?

[E30SPDFRK]

poop

Forgot that I need the pressure plate preloader tool to put my clutch on, so I got nowhere today. Nowhere around even has one; I'm hoping that Inskip BMW will let me borrow theirs again. I would have been all done today too :(

[ILoveMPower]

I have the M30 curse too! Engine is looking good so far keep posting so you stay pumped up to get it done!

[RickSloan]

good luck man, thats awesome

[E30SPDFRK]

Engine is 95% back together. I still need to put the oil pan on and a few little things, but things are looking good so far. Hopefully I can get it in the car tomorrow night and start troubleshooting the little things.

[yert315]

its the m30 curse man... they dont like deadlines

QFT! My deadline was about 6 months ago. Still not on the road.

[E30SPDFRK]

I'm going to kick that curse's ass whether it likes it or not