nice! very very good deal! i wish i found one as clean as what you found, but here in LA... all the e30s i found so far have rust and that's why i'm getting rid of mine
My $400 89 325i
Collapse
X
-
Started pulling the drivers side fender last night, and also found one 1" size surface rust spot on the drivers side door a few inches below the side view mirror. Someone mentioned that maybe the shift linkage got bumped and is the reason for not finding R,1,2 gears, so maybe I'll get lucky with that. The more and more I think about it, the more it makes sense to make this into a track car if I end up having to pull the tranny. That's basically half way to a swap, just pull the m20 along with it and replace with m50 right ? :) I'll just have a lot of work to do, to swap the a/c & suspension parts between the two cars though.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
2.5K
That's my final offer.
SILBER COMBAT UNIT DELTA (M-Technic Marshal)
RTFM:http://www.r3vlimited.com/board/showthread.php?t=56950Comment
-
I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_TwinComment
-
PO's sister ran into something.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
Made a little progress today. Fenders are basically off, cat-back is out. Drive-shaft is coming out next so I can get to the shift-linkage and see if it's broken.
On to the pictures:


Blinging rotors

Doh, looks like it will have to get a fuel cell hehe

So pretty

I wonder if this undertray will fit my black car

Work area lol


Dinan?

That's it for today.Last edited by Jean; 04-02-2008, 07:55 PM.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
Comment
-
Too bad it didn't come with e36 engine lolMtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
looks like a fun pos, i need to find another one. That exhaust looks e36, maybe e34's or e32's had bent mufflers i am not sure, but i know e36's do. Have fun with it, good luck, and also good luck figuring out what to do with it.Comment
-
I am not going to fix this up like I did with my 318i, this will be my track car, it doesn't have to be all pretty. M20 is coming out, A/C is going into my 318i.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment





Comment