If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Not sure if it becomes my DD or a DE/DD. Have a bunch of stuff for it already, Mtech II E36 wheel, Black leather heated seats, black late model interior with late model door panels that have airbags granted will be non functional but look better. Will add rear oem spoiler and put an M tech kit on that I have. Wheels not sure yet. Glass ZKW's are a must with BI-Zennon's for dark nights.
Meet my new welding table. Yes, that is a 1 1/2 inch thick machined steel top.
Why'd you cheap out on only 1.5 inches.... I would have gone at least 38mm....that thing is gonna warp like a bitch the moment you put a hot cup of coffee on it....
Why'd you cheap out on only 1.5 inches.... I would have gone at least 38mm....that thing is gonna warp like a bitch the moment you put a hot cup of coffee on it....
whats up with the slots in the top? was that piece of metal regifted from something?
The table was a fixture or jig originally which is why the top was machined flat. I actually have the top on upside down as there are three 2x8x1 1/2 inch blocks of steel welded to the other side. All the little holes in the table (hard to see in picture) are threaded. I would prefer it to be solid, but it is solid enough and i can use the slots for clamps, etc.
Comment