Post pictures of your most recent purchase

[Swanny]

Pungo 140. 14 foot single person kayak with dry storage and a kick ass seat.


Also....

Yummmmm

[ST1G]

Ouch. Is that what cars look like on the east coast?

[slammin.e28]

Ouch. Is that what cars look like on the east coast?

All of them.


P38 steering box. ^_^

[sam_]

Air Spencer: The best air freshener!



Thule Roof Rack



Mtech 1



And, original BMW sun shade!

[M-technik-3]

Bought from another member here, Thanks :)


Not sure if it becomes my DD or a DE/DD. Have a bunch of stuff for it already, Mtech II E36 wheel, Black leather heated seats, black late model interior with late model door panels that have airbags granted will be non functional but look better. Will add rear oem spoiler and put an M tech kit on that I have. Wheels not sure yet. Glass ZKW's are a must with BI-Zennon's for dark nights.

[ST1G]

Air Spencer: The best air freshener!


Thule Roof Rack


Mtech 1


And, original BMW sun shade!

Sorry the photos were too high quality and small, I had difficulties making out the parts.

[LJ851]

Meet my new welding table. Yes, that is a 1 1/2 inch thick machined steel top.

[sam_]

Sorry the photos were too high quality and small, I had difficulties making out the parts.

sorry i always forget to resize iphone photos before i post

[DER E30]

Meet my new welding table. Yes, that is a 1 1/2 inch thick machined steel top.

Where does one get one of those? Craigslist???

[burkey001]

Meet my new welding table. Yes, that is a 1 1/2 inch thick machined steel top.

Why'd you cheap out on only 1.5 inches.... I would have gone at least 38mm....that thing is gonna warp like a bitch the moment you put a hot cup of coffee on it....


;D

[LJ851]

Where does one get one of those? Craigslist???

I was in the right place at the right time and got it gifted to me by a friend. He got it from a friend in Michigan out of a fab shop.

Why'd you cheap out on only 1.5 inches.... I would have gone at least 38mm....that thing is gonna warp like a bitch the moment you put a hot cup of coffee on it....

:rofl:

[Steveb68]

Christmas in summer

the toilets drain backwards

and 38 > 38.1.

[flyboyx]

Meet my new welding table. Yes, that is a 1 1/2 inch thick machined steel top.

whats up with the slots in the top? was that piece of metal regifted from something?

[LJ851]

whats up with the slots in the top? was that piece of metal regifted from something?

The table was a fixture or jig originally which is why the top was machined flat. I actually have the top on upside down as there are three 2x8x1 1/2 inch blocks of steel welded to the other side. All the little holes in the table (hard to see in picture) are threaded. I would prefer it to be solid, but it is solid enough and i can use the slots for clamps, etc.

[Van Westervelt]