Announcement

Collapse
No announcement yet.

Feeler: Clean shell, race/rally car worthy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Feeler: Clean shell, race/rally car worthy

    I'd put this in the 'for sale' category, but thought it might be best among the racing set. I'm just trying to gauge interest.

    I've a got a '91 325i chassis (lagunengrun) that's, in a phrase, wicked clean. There is only one spot of rot on the passenger side rear, under where the bumper used to be. No rust in the trunk, no rust in the floor pans, hardly anything anywhere.

    The reason it would best suit racer types is I've got the thing completely stripped down. Shell only. No body panels (fenders/doors/trunk/hood), no glass, no drivetrain, no suspension, you get the idea. It's ready to have your roll cage welded in there.

    Anywho, give me a holler if there's any interest. The photos attached are obviously the 'before' pics. E-mail for the current state pics if you like.

    Thanks for looking.
    Attached Files
    Last edited by SlapDash; 04-26-2010, 05:55 AM. Reason: Terminology correction
    www.slapdashracing.com

    #2
    no body panels?

    its not a shell without body panels. its just a chassis at that point... a "shell" implies that it covers something...

    no suspension is going to suck more for trying to sell it. because dealing with a non-roller is a bunch of added headaches.
    AWD > RWD

    Comment


      #3
      Thanks, I edited the copy, but couldn't edit the title.

      Headaches are possible for sure, but it might be worth something to somebody.
      www.slapdashracing.com

      Comment


        #4
        I bought my Cali E30 with EVERYTHING and running for 250 no rust. Yours comes with nothing? are you really trying to use the fact that it's an E30 and include next to nothing and sell it? Maybe if some one has a flat bed you can sell it. I think it is worth only 150 at most.
        ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

        Instagram: @BWeissLeather

        Current cars:
        ~ '87 325 M30B35 swap
        ~ '87 535
        ~ 01 540 Msport 6spd
        ~ '06 X5 4.8is

        Comment


          #5
          Congratulations on the car for $250. Sounds like a score to me.

          I'm not trying to "use" anything. I'm trying to "gauge interest" as stated (obviously, you are not). If someone wants to buy it for $150, that means I'd be $150 closer to my goal, rather than paying someone to get rid of it for me.

          Look, if you're not interested, don't respond.
          www.slapdashracing.com

          Comment


            #6
            The chassis is in great shape. I saw it when I went to buy some interior pieces from SlapDash. It'd be sad to quarter it and throw it into a dumpster, as it is very straight and has no structural rust.

            Originally posted by whysimon
            WTF is hello Kitty (I'm 28 with no kids and I don't have cable)

            Comment


              #7
              Originally posted by SlapDash View Post
              Congratulations on the car for $250. Sounds like a score to me.

              I'm not trying to "use" anything. I'm trying to "gauge interest" as stated (obviously, you are not). If someone wants to buy it for $150, that means I'd be $150 closer to my goal, rather than paying someone to get rid of it for me.

              Look, if you're not interested, don't respond.
              I was not trying to bash your post. I am sorry for it sounding like that.

              I am also WICKED lucky for my current sHELL

              And to your post what town do you live in that does not pay for scrap cars?

              Posting before shots of the car is odd after shots seem better to me. I also know you will email them but that seems too annoying.

              Also I am looking for plastic bumper trim, the kind that is removed to get at the clips on the covers. PM me if you have any.
              ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

              Instagram: @BWeissLeather

              Current cars:
              ~ '87 325 M30B35 swap
              ~ '87 535
              ~ 01 540 Msport 6spd
              ~ '06 X5 4.8is

              Comment


                #8
                just a shell huh? i wish it was a roller :(
                is there is no interest, can i come down and cut out some sheet metal for my e30?
                My feedback:
                http://www.r3vlimited.com/board/showthread.php?t=186328

                http://e30tech.com/forum/showthread.php?t=74911

                Instagram:
                @gears_n_glory

                @functionmotorsports

                Comment


                  #9
                  Originally posted by E30 F34R View Post
                  I was not trying to bash your post. I am sorry for it sounding like that.

                  I am also WICKED lucky for my current sHELL

                  And to your post what town do you live in that does not pay for scrap cars?

                  Posting before shots of the car is odd after shots seem better to me. I also know you will email them but that seems too annoying.

                  Also I am looking for plastic bumper trim, the kind that is removed to get at the clips on the covers. PM me if you have any.

                  No problem.

                  People do pay for scrap cars and scrap metal and the like, but I was hoping someone could use it as a race/rally car. Seems a shame to grind up a car that would make an excellent foundation for something like Spec E30, etc.

                  I will post some shots, but they'll be in a dark garage. I was seeing if anyone was interested before I bothered.

                  Unfortunately, I sold off the plastic bumpers already.
                  www.slapdashracing.com

                  Comment


                    #10
                    Originally posted by bataangpinoy View Post
                    just a shell huh? i wish it was a roller :(
                    is there is no interest, can i come down and cut out some sheet metal for my e30?

                    I wish it was a roller too, but I have to keep the bits that make it a roller for when I toss the rally car into the trees that first time.

                    If there is no interest, you can come down and cut it up. However, the catch is you have to take all the pieces with you!
                    www.slapdashracing.com

                    Comment


                      #11
                      fine. but i hope i wont have to pay you either lmao
                      My feedback:
                      http://www.r3vlimited.com/board/showthread.php?t=186328

                      http://e30tech.com/forum/showthread.php?t=74911

                      Instagram:
                      @gears_n_glory

                      @functionmotorsports

                      Comment


                        #12
                        so did we figure out how much you want for this? and will you ship it to SC?

                        Comment


                          #13
                          Finally, some frickin' pics of this thing...
                          Attached Files
                          www.slapdashracing.com

                          Comment


                            #14
                            Part 2 of 3...
                            Attached Files
                            www.slapdashracing.com

                            Comment


                              #15
                              Part 3 of 3...
                              Attached Files
                              www.slapdashracing.com

                              Comment

                              Working...
                              X