949 Racing 15x10 wheels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Wh33lhop
    R3V OG
    • Feb 2009
    • 11705

    #46
    Originally posted by bmwguy325is
    Mexi special HUH I am sure my suspesnion is worth more than your car LOL
    Pissing match fail.

    Jean, have you talked with cbouchez regarding fender extension?
    paint sucks

    Comment

    • Jean
      Moderator
      • Aug 2006
      • 18228

      #47
      ^ yes, and i have saved as many pictures of his mt1 car as I found :)
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment

      • bmwguy325is
        E30 Fanatic
        • May 2011
        • 1262

        #48
        Originally posted by MR 325
        Well I am quite sure it's not worth more than either one of my E30s but I fail to see how that's relevant.
        It has everything to do with nothing. Just getting back at the mexi comment. Having fun. And average retail on a E30 is $4000. So yes worth more than at least one.
        Bottom line I just like 275s on E30s
        sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
        The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

        Comment

        • accident
          R3V OG
          • Sep 2008
          • 7303

          #49
          i promise you, Matt's E30s are worth more than your suspension. Unless you're running Motons, and even that would be pushing it.

          Originally posted by ROLLingKING
          i have a bronzit and plan on making it look sweet.
          Originally posted by slammin.e28
          Moral of this story?

          If you drive your e30 on stairs, you're gonna have a bad time.

          Comment

          • robgoesvroom
            E30 Modder
            • May 2009
            • 821

            #50
            Who cares how much his car is worth? I think bmw guy is running Ohlins suspension. Keep the thread on topic guys! The internet has too much hate
            sigpic

            Comment

            • Jean
              Moderator
              • Aug 2006
              • 18228

              #51
              I'll keep you guys posted, I am currently looking for some bad/used 275/35/15s for test fitting the 15x10 wheel. I don't want to buy new tires mid-season, and realisticially only being able to run the last 2 weekends on them.

              But, still going with this, just wait take a little longer as I am doing research and making some calls.
              Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



              OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

              Comment

              • Jb325is
                R3VLimited
                • Oct 2003
                • 2137

                #52
                How big of a spacer do you think you'll need? I would think a 275 on a 10" wouldn't be much meatier than a 225 on an 8" wheel. I would say 15mm would clear it, no? You're on GC's right?
                - '88 m54 coupe

                <3

                Comment

                • brian52555
                  E30 Addict
                  • Feb 2009
                  • 425

                  #53
                  *Patiently waits for Jean to do all the legwork figuring spacers, fitting etc so that I can replicate it afterwards*

                  Just kidding. I've been following your car for a while, one of my favorites. In fact a lot of the stuff I've done to my car was inspired by your build. The fact that you consistently dust other cars at autocross is just a bonus... hope to meet you at a norcale30 meet soon.

                  Comment

                  • bmwguy325is
                    E30 Fanatic
                    • May 2011
                    • 1262

                    #54
                    Originally posted by accident
                    i promise you, Matt's E30s are worth more than your suspension. Unless you're running Motons, and even that would be pushing it.
                    Mine cost more they offer off the self parts...
                    Originally posted by robgoesvroom
                    Who cares how much his car is worth? I think bmw guy is running Ohlins suspension. Keep the thread on topic guys! The internet has too much hate
                    I agree and was just making jokes. Hell to be fair its worth more than my OWN car. As far as the insurance company and car lots see fit.
                    AND YES ON TOPIC
                    Originally posted by Jean
                    I'll keep you guys posted, I am currently looking for some bad/used 275/35/15s for test fitting the 15x10 wheel. I don't want to buy new tires mid-season, and realisticially only being able to run the last 2 weekends on them.

                    But, still going with this, just wait take a little longer as I am doing research and making some calls.
                    I have some I will give you just cover the UPS and its done. That gets you a start.
                    I killed them doing this http://www.flickr.com/photos/scott_r...7627118702032/ as they were last seasons tires and dead anyhoo. Let me know
                    Attached Files
                    sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
                    The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

                    Comment

                    • Jean
                      Moderator
                      • Aug 2006
                      • 18228

                      #55
                      Dude, i'll take them! Maybe fedex ground will be cheapest?

                      Can you give me a shipping quote to 95821 please, I want at least one if not both depending on cost of shipping from Utah.
                      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                      Comment

                      • Jean
                        Moderator
                        • Aug 2006
                        • 18228

                        #56
                        Originally posted by Jb325is
                        How big of a spacer do you think you'll need? I would think a 275 on a 10" wouldn't be much meatier than a 225 on an 8" wheel. I would say 15mm would clear it, no? You're on GC's right?
                        9.2 vs 10.8 section width between current 225 vs future 275 according to tirerack.com

                        You are correct, gc modified struts and coils/plates. I am not sure, thats why I want to test fit and see what needs to happen.
                        Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                        OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                        Comment

                        • JJ1
                          Advanced Member
                          • Oct 2009
                          • 176

                          #57
                          Cant wait to see the results. Its safe to assume you will have to modify the fenders, what do you have in mind?

                          Comment

                          • bmwguy325is
                            E30 Fanatic
                            • May 2011
                            • 1262

                            #58
                            Originally posted by Jean
                            Dude, i'll take them! Maybe fedex ground will be cheapest?

                            Can you give me a shipping quote to 95821 please, I want at least one if not both depending on cost of shipping from Utah.
                            Ya what I can do is like tire rack. Ill stick them together and mail them as one "box" Ill get a quote tomorrow or next day.
                            sigpic"If one does not fail at times, then one has not challenged himself." -Ferdinand Porsche
                            The ugly car: http://www.r3vlimited.com/board/showthread.php?t=209713

                            Comment

                            • Jean
                              Moderator
                              • Aug 2006
                              • 18228

                              #59
                              Originally posted by JJ1
                              Cant wait to see the results. Its safe to assume you will have to modify the fenders, what do you have in mind?
                              One option is to go with the add-on/rivet type fenders, and second is to take it to a good body shop and get the fenders extended . I am leaning towards second option, will get some quotes and go from there.
                              Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                              OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                              Comment

                              • Wh33lhop
                                R3V OG
                                • Feb 2009
                                • 11705

                                #60
                                Do NOT rivet up your car. I am close enough to find you and smack your smirky face.
                                paint sucks

                                Comment

                                Working...