Group Buy Pre-Order Thread: e30 fitment 15x10 track wheels

[Wh33lhop]

I'd say it depends on the tire you are running on it... 275/35 will be a bit tougher to fit than say a 245/40.

The Maxxis RC1 is supposedly coming out in 245/40r15, if that happens I may wind up picking up a set of 10s and seeing what I can do.

[klodkrawler05]

Thats a very valid point as well!

[FLG]

I'll have Ryan from motorsport hardware chime in here again about offering spacers

Sent from my SCH-I545 using Tapatalk 2

[henryki]

those are pretty rad, even for street use. IMO.

[z31maniac]

I'd say it depends on the tire you are running on it... 275/35 will be a bit tougher to fit than say a 245/40.

The Maxxis RC1 is supposedly coming out in 245/40r15, if that happens I may wind up picking up a set of 10s and seeing what I can do.

http://www.prima-racing.com/update-maxxis-victra-rc-1-comparison-vs-nitto-nt01/

[brian52555]

Just looking on Tirerack... doesn't seem to be any mildly streetable options at 245 and 275 widths (aka Hoosiers only). Only vaguely streetable option would be R888's at 235 width... would that be ok on a 10" rim? Seems a bit much. Although I guess if you are looking at picking up 15x10 wheels for an e30 streetability shouldn't be expected.

[Wh33lhop]

Just looking on Tirerack... doesn't seem to be any mildly streetable options at 245 and 275 widths (aka Hoosiers only). Only vaguely streetable option would be R888's at 235 width... would that be ok on a 10" rim? Seems a bit much. Although I guess if you are looking at picking up 15x10 wheels for an e30 streetability shouldn't be expected.

If you go back a page I posted about a bajillion pictures of R888s on 15x10s. Additionally, if you read this page the Maxxis RC1 should be coming out in 245/40R15 at some point, which would be viable with this wheel.

I am still iffy on fender fitment though.

[brian52555]

Nice - missed that the first time through. Thanks.

[Bimmerman325i]

I'm really excited for the Maxxis. Really want to test them vs NT01

[hoyabmw]

Just got off the phone with Phil's Tire. The wheel is actually 15x10 et15. Better offset than the 949, but still not anything close to what we were trying to get with the group buy. The mold belongs to Phi's Tire too, so they are the only ones who will be offering it. If you're willing to run 20 mm spacers, then these work. I'm going to look at getting my wheel shells redone to allow clearance for the big brakes.

[bmnut2002]

Well, that's extremely disappointing. Looks like I'll be sticking with my 6ul wheel sets then. No point changing them for 10mm.

[robgoesvroom]

Any updates? Anyone have photos of real wheel or ordered from Phil's yet?

[robgoesvroom]

Well, that's extremely disappointing. Looks like I'll be sticking with my 6ul wheel sets then. No point changing them for 10mm.

What size and offset 6ul wheels and tires are you running? What spacers are required to make it work? Thanks!

[Wh33lhop]

Any updates? Anyone have photos of real wheel or ordered from Phil's yet?

Just thinking about these yesterday. I see no actual product with some googlage but they've been named the "aero 500". It looks like they come with both a 54.1mm (miata) and 57.1mm (e30) center bore. 15x9 come in +36 only and 10s come in +25 and +15. $200 per 15x9, $220 per 15x10.

Nobody seems to actually have a set yet.

[robgoesvroom]

From Phil:

The wheels will not be available until sometime the end of Oct beginning of Nov.

We do not have any pictures of the wheels with tires mounted.

We will not know shipping until the wheels are in stock.