I was wondering if any of you re-pack your front wheel bearings with a higher performing grease for the track? Specifically on the FAG bearings.
I've found some older posts on Bimmerforums where the E36 guys used to do that, but it sounds like the internals of the SKF and FAG bearings were becoming more difficult to tear apart.
For reference, FAG bearings have about 6,000 miles with about 15 track days on them. The front left is just barely starting to show signs of needing replacement.
I've found some older posts on Bimmerforums where the E36 guys used to do that, but it sounds like the internals of the SKF and FAG bearings were becoming more difficult to tear apart.
For reference, FAG bearings have about 6,000 miles with about 15 track days on them. The front left is just barely starting to show signs of needing replacement.
Comment