SoCal General Chat

[E30_Pare]

Need to keep that leather saturated. Or it will pull and shrink. Seen it all to many times in private collections. Keeping a towel on it when parked would help a lot.

[mod_junkie]

anyone in the IE have a known working TPS I could test if thats whats causing the surging/hesitating in the high rpms on my whip?

[einstein57]

I've come to learn in my old age that you rarely get what you want if you don't know how to ask for it.

[JinormusJ]

Me likey

[E30_Pare]

check your intake boot for cracks.

[E30_Pare]

I've come to learn in my old age that you rarely get what you want if you don't know how to ask for it.

gimme gimme gimme! am i doing it right?

[Ayman]

How hard is it to fit 16x9.5 et 11 all around?

[IRON-E]

Roll all fenders, duuun!

[mbonanni]

I want all my fenders rolled. Someone do this for me.

Sent from my SPH-L710 using Tapatalk 2

[einstein57]

You might need to go lower offset to clear the strut tubes.

[IRON-E]

I want all my fenders rolled. Someone do this for me.

Sent from my SPH-L710 using Tapatalk 2

Get a hold of the official fender roller, Tony.

[CHIF8008]

bad idea to run radiator hoses close/ against the oil pan? (front side) my only concern is how hot the pan will be.

swapping in a 318 rad on my m20 and the lower rad hose is at the bottom on the passenger side(which is opposite of the stock radiator, along with the expansion tank hose) which i also wanna run below with the lower rad hose.

all i can think is that either the hose melts? or that the pans heat would re-heat the cooled coolant in the hose and cause overheating problems?

thoughts/ concerns?

[einstein57]

Oil and water temps are about the same

[Tonys18t]

I want all my fenders rolled. Someone do this for me.

Sent from my SPH-L710 using Tapatalk 2

bring it down and i'll sort it

[nickflic3]

Anybody need a clean e24? Bought some center caps from him last night, chill dude and the car is as clean as it looks

http://inlandempire.craigslist.org/cto/4020056688.html