-
-
One of mine was halfway broken off and missing. What i did was drilled a leader hole in it and tested a screw that i was going to use to make sure it would grab and hold it in place. Then i got some o-rings that were the same size in diameter as your nub there in the pic,and stacked them up.Then i used here we go J/B weld and filled it as high as the other ones so they were even in height. I took the screw that i was going to be using and put it in before the j/b weld got to sit and harden and left it there to completely dry and screwed it all the way down in. Then when it was dry i cut out the o-rings off and shaved down the extra debre And WALA and it worked to hold it down. Now do you have more than one like that or only one? Because if you have more than one stick to the 3M bodyshop type tape then.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
garage queen 91 bmw 325is / 1972 Chevy El Camino 355 sbc 450hpComment
-
mornin..... happy newyears eve so cal!!91 318is...DD:finger:/85 325es SOLD/91 318is RIP
Originally posted by naplesE30Castro Motorsport/E30 specialistOriginally posted by einstein57
North Hollywood, Ca. 818 310-2497Comment
-
Good morning. Last day of the year at the rowland heights garage then.... monday i am starting at our chino hills garage. Blagh.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
garage queen 91 bmw 325is / 1972 Chevy El Camino 355 sbc 450hpComment
-
4 hours and im outta here.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
garage queen 91 bmw 325is / 1972 Chevy El Camino 355 sbc 450hpComment
-
ill most likely try this with o-rings. What i tried to do was fill it in with putty and set in the screw before it would completely harden. The problem i had was finding a screw that was both long enough and short enough so that the corner of the spoiler would not stick up from it being to long and also long enough for me to be able to screw it with a washer. In other words i had a lot of trouble finding the proper screw. This didn't work because the screw was not long enough so i almost had to set it just enough for the base to stick and in the end it was not strong enough so when i tighten'd the screw it pretty much pop'ed it out of the putty
]Comment
-
damn im still trying to sand down spoiler. im about ready to take a sander to it!
「'89 BMW 325is | '02 Mitsubishi Montero Limited | '2005 GMC Sierra 2500 Duramax | 2007 BMW M5 」
「my feedback thread」Comment
-
happy new years eve r3v what's everyone up to?
Comment
-
Mmmmm should be a good night. gonna pick up pizza and hang with some friends. hope i dont get pulled over tonight trying to go home or in an accident. its a 30 min drive that i normally do in 15. but i think i should take it easy- dont want some stupid ticket to deal with-FREEDOM- is cruisin at 80, windows down and listening to the perfect song-thinking "this is it"
-The Beauty in the Tragedy-
MECHANIC SMASH!!- (you all know you do it)
Got Drop?? ;-)
Originally posted by JinormusJComment
-
just got into Williams az. we were gonna go to the grand canyon but its Hellas snowy so ordering in some Mexican and gonna crash early.
right now its 12. its gonna be -7. not including wind. I mean damn its cold.Last edited by Avus E30; 12-31-2010, 04:36 PM.HDE30 <3Comment
-
424 miles. somewhere in between 8 and 9. gaining an hour I imagine we will make home by 4 or so. only one day left of driving.HDE30 <3Comment
-
「'89 BMW 325is | '02 Mitsubishi Montero Limited | '2005 GMC Sierra 2500 Duramax | 2007 BMW M5 」
「my feedback thread」Comment
Comment