Sunday Cruise 3/14/10 (SoCal)

[Stephen]

http://www.steakandbj.com/

I'll be in seattle, with the lady, on this meat celebration day

[E30_fiend]

BJ? will you be the one to handle all the shafts? :giggle:

yo, I never got an answer, has the route changed since I sent you my revised route? Or is everything the same? I at least need some times so I can gauge what time to meet you guys at the meeting spot or at least a time when you guys are leaving.

let me know. PM is fine





Taylor

[IRON-E]

yo, I never got an answer, has the route changed since I sent you my revised route? Or is everything the same? I at least need some times so I can gauge what time to meet you guys at the meeting spot or at least a time when you guys are leaving.
let me know. PM is fine
Taylor

Shut up fool, we'll call you.

[Be30mer]

wish I could go, but im celebratin national Pi day with my nerdy friends. (pi = 3.14) sunday is 3/14

[e30_3I8I]

-_____- driveshaft bolts came off...

I was driving my car and randomly my car was shaking like crazy off the line.. i come home and put the car on jacks.. i see 2 of the 3 bolts that hold the geubo or w.e were gone? i tighted the shit out of it.. i guess im going to have to find them before sunday.. i bet i will though....

[lifestyle101]

If you guys have 2 way radios or walkie talkies bring them with you to stay in contact with the rest of us. I encourage that you guys bring radar detectors as we do tend to speed a little every now and then....

[lifestyle101]

Gas up your cars, check the fluids and be ready to drive. We do not want to go look for gas stations at the time of departure (OBEY)


Be prepared with some tools, oil, shop rags, PS fluid, Coolant and anything else you guys think we might need in case of a brake-down. :-D

lumpia and balut

[E30_fiend]

lumpia and lumpia

fixed

[mcr_driver]

how much are two way radio's?

[e30trooper]

well lowering my front was a fail! I couldnt get the fuking ball joint off. Even smacking it with a hammer and loads of wd/40. I did however sorta fix my car. No more running rich :D Had a major vacume leak and fixed that. Some how not being easy on gas i drove 72 miles on 9 bux lol im like wtf! Guess ill be at the drive with a pre runner e30 lol

[kronus]

well lowering my front was a fail! I couldnt get the fuking ball joint off. Even smacking it with a hammer and loads of wd/40. I did however sorta fix my car. No more running rich :D Had a major vacume leak and fixed that. Some how not being easy on gas i drove 72 miles on 9 bux lol im like wtf! Guess ill be at the drive with a pre runner e30 lol

When we did mine, one of the fuckers didn't come out until we pulled the strut and assaulted it with a sledge. A pickle fork would have helped considerably ;)

[IRON-E]

Morning bump peeps!

[E30_fiend]

well lowering my front was a fail! I couldnt get the fuking ball joint off. Even smacking it with a hammer and loads of wd/40. I did however sorta fix my car. No more running rich :D Had a major vacume leak and fixed that. Some how not being easy on gas i drove 72 miles on 9 bux lol im like wtf! Guess ill be at the drive with a pre runner e30 lol

sometimes it takes a while but the easiest way to do it is to spray some PB Blaster on the balljoint and leave it for a little while. Then see if you can back the nut off. after the nut is off, just pry between the balljoint and the strut assembly with a screwdriver and the smack the knuckle with a hammer a few times. The balljoints have to be pried on usually with the above procedure before they budge. Its actually a good thing when the ball joints are stuck because you know the ball is moving and not the tapered shaft inside of the strut assembly.

anywa thats the procedure. Maybe you can venture down sometime and we can work on it at my shop. Stephen comes back next weekend so we will be here most every night after work.


let me know Ben. You got my number if not a bunch of the fags on here have it.




Taylor

[IRON-E]

let me know Ben. You got my number if not a bunch of the fags on here have it.

Taylor

I have his #

[einstein57]

There's always the drift night in two weeks. Riverside should be closer for you


Also you guys should really take advantage of the loaner tools at your auto parts store. The have ball joint seperattors and forks there for free