Well, yeah. It's come to that time. :???:
I do not have pictures of the items at the moment, but will within the week.
1. Full 2.25'' "straight-pipe" header-back exhaust system
Setup built by Castro himself, so you know it's beautiful as he is an artist when it comes to exhaust systems. It consists of a Y-pipe coming from the manifold to full 2.25'' all the way back, a "dummy" cat that I installed myself, an 18'' resonator to quiet things down, and the sought after Magnaflow 14815 in the rear with dual 2.5'' tips.
Details:
Stock manifold to collector -> Y-pipe -> "dummy" cat -> 18'' resonator -> Magnaflow 14815.
-2.25'' straight through.
-"Dummy" cat.
-2.25'' inlet/outlet 18'' length resonator.
-2.25'' inlet, dual 2.5'' outlet Magnaflow 14815 muffler.
-Muffler is slightly offset so the tips come out sideways; it was the look I wanted.
-Muffler is painted flat black so it won't reflect headlights.
-Tips are polished.
-Muffler hangars in stock locations. Plug 'n Play.
$300 for the whole shabang, manifolds included upon request.
2. Castro's Motorsport M20 MAF kit + Airbox. SOLD w/o airbox.
BEST bang for the buck mod you can do for the m20 using an "i" Motronic.
Vastly improves throttle response, and noticeably adds power. It's like driving a more modern car. This mod alone made me fall in love with my car all over again. For reference purpose only, I was able to pull away from my friend's chipped/catless/flywheel E36 325is and my other bud's stock E36 328i. Go figure!
Included:
-173 ECU with Castro's aggressive MAF chip installed.
-M50 MAF sensor.
-Plug adapter that is directly wired to the harness.
-Slim Cone filter included
$260, and have Castro install it on my dime.
3. Medium case 4.10LSD SOLD
Want your car to get the JUMP on others in terms of acceleration? Then this is for you.
~160k miles and originally spent most of it's life mated to an automatic transmission until my E30 was 5 speed swapped before I purchased it.
Spins freely and locks up just fine. Leaves 2 tire marks on the ground accordingly :p.
I'll save you the haggling and only want $200 for it.
4. Late model Fog lights. PENDING SALE
These things help you see at night and look kewl like racecar.
Details:
-Acceptable pitting.
-No cracks(iirc).
-Brackets included.
-Wiring included at no charge upon request.
-Hugs included.
$60 seems fair.
5. Schwarz colored 'IS' side skirts. SOLD
Best looking side skirts in my opinion. Sorry no hardware included.
Bottom clips can be had for $1 each at the dealership or so and double sided tape seems to work for the top portion when I see people running them. Mine were drilled the proper way into the rockers so maybe I can get measurements for you if that's the path you want to follow!
$145 , $25 more and I'll include a perfect 'IS' rear spoiler.
6. Black late model front valence
95% straight with the exception of the passenger side bottom where there is a bit of a wave.
Schwarz Brake ducts included.
Oil cooler fin included.
$95 picked up. Add $65, and I'll include the front Schwarz bumper +hardware.
7. Castro's Motorsport Airbox heat shield SOLD
This is for m20 and 24v applications.
Custom made fiberglass heat-shield airbox exclusively sold and made by Castro himself.
Protect your intake/filter from heat in the engine bay.
More pictures/info here: http://www.r3vlimited.com/board/showthread.php?t=164006
$150 OBO
8. US Ellipsoid headlights, highs and lows SOLD
Straight off the car, US ellipsoids that served me well. Upgrade your sealed beams for a price that is hard to beat.
Includes:
-Brackets
-Black rings
-Lamin-x style light tint for that look and to protect from rock chips.
-No bulbs, sorry!
Adjusters are NOT frozen and adjust freely.
Very minor pitting, you'd expect more from a car built pre-90's.
Driver side high-beam has a 2-way surface crack.
Here is my best picture of them I have since they are not currently in front of me. (pre-black rings)
The going rate for these seems to be around $125
All yours for $94
I have more items that I will add later, but these are I guess the most desirable ones that I'd like to just throw out there first.
PM me if there is something you know you want that you know I might have and have not listed, and I'll give you a good deal(interior bits, body panels).
Local pick up preferred, 91745.
Thanks for looking :)
-Abby
I do not have pictures of the items at the moment, but will within the week.
1. Full 2.25'' "straight-pipe" header-back exhaust system
Setup built by Castro himself, so you know it's beautiful as he is an artist when it comes to exhaust systems. It consists of a Y-pipe coming from the manifold to full 2.25'' all the way back, a "dummy" cat that I installed myself, an 18'' resonator to quiet things down, and the sought after Magnaflow 14815 in the rear with dual 2.5'' tips.
Details:
Stock manifold to collector -> Y-pipe -> "dummy" cat -> 18'' resonator -> Magnaflow 14815.
-2.25'' straight through.
-"Dummy" cat.
-2.25'' inlet/outlet 18'' length resonator.
-2.25'' inlet, dual 2.5'' outlet Magnaflow 14815 muffler.
-Muffler is slightly offset so the tips come out sideways; it was the look I wanted.
-Muffler is painted flat black so it won't reflect headlights.
-Tips are polished.
-Muffler hangars in stock locations. Plug 'n Play.
$300 for the whole shabang, manifolds included upon request.
2. Castro's Motorsport M20 MAF kit + Airbox. SOLD w/o airbox.
BEST bang for the buck mod you can do for the m20 using an "i" Motronic.
Vastly improves throttle response, and noticeably adds power. It's like driving a more modern car. This mod alone made me fall in love with my car all over again. For reference purpose only, I was able to pull away from my friend's chipped/catless/flywheel E36 325is and my other bud's stock E36 328i. Go figure!
Included:
-173 ECU with Castro's aggressive MAF chip installed.
-M50 MAF sensor.
-Plug adapter that is directly wired to the harness.
-Slim Cone filter included
$260, and have Castro install it on my dime.
3. Medium case 4.10LSD SOLD
Want your car to get the JUMP on others in terms of acceleration? Then this is for you.
~160k miles and originally spent most of it's life mated to an automatic transmission until my E30 was 5 speed swapped before I purchased it.
Spins freely and locks up just fine. Leaves 2 tire marks on the ground accordingly :p.
I'll save you the haggling and only want $200 for it.
4. Late model Fog lights. PENDING SALE
These things help you see at night and look kewl like racecar.
Details:
-Acceptable pitting.
-No cracks(iirc).
-Brackets included.
-Wiring included at no charge upon request.
-Hugs included.
$60 seems fair.
5. Schwarz colored 'IS' side skirts. SOLD
Best looking side skirts in my opinion. Sorry no hardware included.
Bottom clips can be had for $1 each at the dealership or so and double sided tape seems to work for the top portion when I see people running them. Mine were drilled the proper way into the rockers so maybe I can get measurements for you if that's the path you want to follow!
$145 , $25 more and I'll include a perfect 'IS' rear spoiler.
6. Black late model front valence
95% straight with the exception of the passenger side bottom where there is a bit of a wave.
Schwarz Brake ducts included.
Oil cooler fin included.
$95 picked up. Add $65, and I'll include the front Schwarz bumper +hardware.
7. Castro's Motorsport Airbox heat shield SOLD
This is for m20 and 24v applications.
Custom made fiberglass heat-shield airbox exclusively sold and made by Castro himself.
Protect your intake/filter from heat in the engine bay.
More pictures/info here: http://www.r3vlimited.com/board/showthread.php?t=164006
$150 OBO
8. US Ellipsoid headlights, highs and lows SOLD
Straight off the car, US ellipsoids that served me well. Upgrade your sealed beams for a price that is hard to beat.
Includes:
-Brackets
-Black rings
-Lamin-x style light tint for that look and to protect from rock chips.
-No bulbs, sorry!
Adjusters are NOT frozen and adjust freely.
Very minor pitting, you'd expect more from a car built pre-90's.
Driver side high-beam has a 2-way surface crack.
Here is my best picture of them I have since they are not currently in front of me. (pre-black rings)
The going rate for these seems to be around $125
All yours for $94
I have more items that I will add later, but these are I guess the most desirable ones that I'd like to just throw out there first.
PM me if there is something you know you want that you know I might have and have not listed, and I'll give you a good deal(interior bits, body panels).
Local pick up preferred, 91745.
Thanks for looking :)
-Abby
Comment