ie need help with my 325e head

[MR 325]

My boss has a rebuilt head ready to go for 400.00 bucks. Valve job, new stem seals,valves seated,pressure tested,resurfaced with rockers/springs/camshaft complete. It is for a 325e/es.

Will your boss meet him halfway?

[QUKBMER]

Will your boss meet him halfway?

I dont know if he will ? We are in chino and he lives in chino hills.

[timelessdom]

Also if some one knows a good shop to get a head resurfaced in the ie that would help

[IRON-E]

Also if some one knows a good shop to get a head resurfaced in the ie that would help

Do you think the shop, will shop will come meet you half way?

It's just a ? Das y I ax.....:D

[timelessdom]

Thanks every one that pm me with the help

[ak-]

My boss has a rebuilt head ready to go for 400.00 bucks. Valve job, new stem seals,valves seated,pressure tested,resurfaced with rockers/springs/camshaft complete. It is for a 325e/es.

I'd seriously be all over that if it was for an I.
But you'd half to meet me half way.

[IronmanE30]

I got one for $120 delivered

Cheers,

Jim

[accident]

lolwut

[einstein57]

And a head from the junkyard cost only $60 so Idk what junkyard u go to

http://www.pickyourpart.com/pricing/

its $55+$7+tax for a 4 banger head. They usually charge around $80 for a six cylinder before taxes and core charge. Plus admission, gas, and 2-3 hours of grunt work if you know what your doing.

[Cabriolet]

my dad pulled 6 "I" heads to get a good on at pick'npull. he can pull one in 45min and be checked out. =P

pulling unknown heads, sucks.

[MR 325]

http://www.pickyourpart.com/pricing/

its $55+$7+tax for a 4 banger head. They usually charge around $80 for a six cylinder before taxes and core charge. Plus admission, gas, and 2-3 hours of grunt work if you know what your doing.

A friend of mine recently wanted to buy a complete M20 head at Pick Your Part. They wanted $118 with taxes. LOL.

[ethrtyiS]

Do you think the shop, will shop will come meet you half way?

It's just a ? Das y I ax.....:D

[Robotin]

A friend of mine recently wanted to buy a complete M20 head at Pick Your Part. They wanted $118 with taxes. LOL.

i thought CA was serious about cracking down on all that rape...

[delatlanta1281]

Screw that, Bobby Thrash's parts guy quoted me 100 bucks for an I piston. He wouldn't even meet me half way. Not kidding about the quote though. OP, how do you know you will get a good head from a pick and pull? I would say Mr 325 would have been a good bet. But then again, you kinda messed that one up. Maybe you could drive all the way there and buy him a burger or something?

[mr.vang]

I've decided to share my anger with the rest of you.

I offered the OP a complete cylinder head off of a running engine for $60 cash. Yes, $60. They charge $70-$100 for these at the yards and not only do you have to remove them yourself, you don't have somebody guaranteeing you it came from a good running engine.

He texted me tonight asking if I can meet him halfway. This thing is fucking $60. I'd rather throw the head in my shed and keep it.

Hopefully the head from hotballs works out!

i feel you bra, i fucken hate when buyer want to meet halfway for an already good deal.