Official WTB at the Picnic thread 09

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • soul rebel
    replied
    Drivers side front fender wheel well liner for a cabrio(not sure if these are specific or not).
    2 14" basketweave caps with roundels (in good shape)

    Leave a comment:


  • CorvallisBMW
    replied
    still need those BBS RZ wheels, check pg.1

    Leave a comment:


  • hoveringuy
    replied
    Anyone have an extra set of DOHC ebay headers?

    Leave a comment:


  • Erick
    replied
    Originally posted by garretvs
    ~euro or plastic bumpers
    ~wheels

    I will also have the *complete* write up that will be availiable for $150. It is 21 chapters, with step-by-step instructions, pics from our build, Catia drawings of the engine mounts and HydroBoost items. Also parts lists, A/C hose fab, wiring, radiator mounting, etc. The book is about 250 pages. It will (for now) only be available in hard copy form.

    Tell me beforehand if you are interested in a copy and I will have one ready for you. Otherwise, check out the book and we can work it out there.
    See, if it wasn't for the fact that my entire M30 swap cost me slightly more than what you're asking for that complete write up, I think I'd consider going LS1.

    But for right now... I rather the M30 swap, that's costing 1/20th of what an LS1 would be.

    ............but how I would love an LS1 in my e30 though :D

    - Erick

    Leave a comment:


  • nando
    replied
    getting one locally today hopefully.. will let you guys know if it doesn't work out.

    Leave a comment:


  • hoveringuy
    replied
    I've got one. I'll bring it along and if it's what you want you can have it for cheap.

    Originally posted by nando
    I may need a crank position sensor and holding bracket if somebody has one. Preferrably a sensor that doesn't have a frayed chord like the one somebody else sold me!

    Leave a comment:


  • gregslow318i
    replied
    Originally posted by nando
    I may need a crank position sensor and holding bracket if somebody has one. Preferrably a sensor that doesn't have a frayed chord like the one somebody else sold me!
    I think I have one.... If I do its yours for $25 at the picnic

    Leave a comment:


  • nando
    replied
    I may need a crank position sensor and holding bracket if somebody has one. Preferrably a sensor that doesn't have a frayed chord like the one somebody else sold me!

    Leave a comment:


  • e3o-master
    replied
    86-87 es iS fogs........ anyone?







    Originally posted by chrisis318is
    deal

    pm'd #

    Leave a comment:


  • ChrisK
    replied
    Originally posted by e3o-master
    i got these.


    10$ for both?
    deal

    Leave a comment:


  • DB325i
    replied
    Looking to find
    -4 centercaps for 15" basketweaves that I might restore
    -Wheels (if I don't decide to restore/straighten my 15" basketweaves)
    -Maybe new springs and shocks
    -Anything else that might catch my eye and be useful to a new e30 owner

    Leave a comment:


  • StereoInstaller1
    replied
    Originally posted by nwvb bmw
    i need some side skirts, wheels and a radio.
    ygpm

    Leave a comment:


  • e3o-master
    replied
    Originally posted by chrisis318is
    bulb for tach/speedo and a cigarette lighter


    i got these.


    10$ for both?

    Leave a comment:


  • hoveringuy
    replied
    Fried ECU

    I could use your fried 413 ECU. It will give it's life to science.

    Leave a comment:


  • nickpdx
    replied
    Anyone have a 13-button OBC wiring harness?

    Leave a comment:

Working...