Announcement

Collapse
No announcement yet.

who knows electrical crap?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    who knows electrical crap?

    I bought a $500 e30 and knew the electrical system was screwy, but just recently realized how bad it is. Some PO spliced into cables all over to ghetto rig the car and im trying to put it back to normal. I have the interior stripped and just need some help figuring out how to fix this shit. Anyone willing to come over and help? I live 4 blocks away from VCU's Monroe Park Campus.
    sigpic
    1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
    1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
    1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

    #2
    I have full on wiring diagrams that should help. But nah, don't feel like driving down to richmond :-p

    Status: HG repair. 488wtq though!

    Comment


      #3
      You can access the ETK's at:



      That tells you what wires go to what components, what color they are, wire thickness, whether it's power or ground or some type of signal, what connector it goes to, etc...

      Do you have a list of stuff that doesn't work properly?
      85 325e m60b44 6 speed / 89 535i
      e30 restoration and V8 swap
      24 Hours of Lemons e30 build

      Comment


        #4
        Why not just swap harnesses?

        At least go buy yourself a decent set of crimpers and a package or three of butt connectors and just make the harness stock again?

        Closing SOON!
        "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

        Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

        Thanks for 10 years of fun!

        Comment


          #5
          Originally posted by shiboujin View Post
          I have full on wiring diagrams that should help. But nah, don't feel like driving down to richmond :-p
          This.
          I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.

          Paypal: vdang5@gmail.com

          Delta Auto Care
          2875-C Towerview Road
          Herndon, VA
          703.435.1375

          My Feedback Thread: Evil_Twin

          Comment


            #6
            i was going to just pull a full harness from a junker, but i need an 88+ 325i and the yards dont have any. I'll try to just figure it out using the diagrams though.

            Whats not working:
            1) the ENTIRE sound system has been hacked (wires cut/jumped and speakers/amp missing)
            2)Brake/reverse/turn indicator lights in the rear
            3)aux fan may have been put on a switch (PO said it was but i haven't fount it yet)

            basically going off the check panel, i have bingo 2 ways...
            sigpic
            1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
            1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
            1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

            Comment


              #7
              eh. fuck the check panel. That's usually just sensors anyway. The rear wiring is all under the driver's side door molding. It tends to get fucked up with water.

              The stereo stuff is probably better if you rerun it yourself. Those stock wires weren't that great. But regardless, they do run in the same spot as the trunk wiring. The lights in the back don't work or the check panel says they don't but they really do? Because, if the check panel is just being gay, you simply have to replace the trunk relay for it (behind the antenna ish).

              aux fan? eh, fuck that. Just run your own.

              Status: HG repair. 488wtq though!

              Comment


                #8
                Get rid of all the wiring for the sound sound system, go to home depot, buy similar gauge wire by the spool (large spool) and re wire the whole setup yourself. it's far easier and better in the long run.

                ditch the standard aux fan and go get a spal for cheap and run it remotely like everyone else.

                rear lights you'll need to track the wires, start from the plug from the actual lights and go from there. it's easier if you remove the sound system wiring first.
                stephenbrody.com

                Comment


                  #9
                  Don't be silly, guys...the stock wire is 100X better than shit from Home Depot or any normal car stereo shit.

                  You can adapt a late model harness to do damn near anything you want.

                  Closing SOON!
                  "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

                  Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

                  Thanks for 10 years of fun!

                  Comment


                    #10
                    Can't tell if you're trying to be sarcastic or not Luke. Although I definitely have a ton of wire from my parts car stored away just for this type of use!
                    stephenbrody.com

                    Comment


                      #11
                      He's not kidding... the stock stereo wiring really isnt all that bad.


                      BUT THIS!!!!! http://www.r3vlimited.com/board/showthread.php?t=194272

                      Comment


                        #12
                        Show me Home Depot wire that is still shiny inside after 5 years much less 25...

                        Closing SOON!
                        "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

                        Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

                        Thanks for 10 years of fun!

                        Comment


                          #13
                          I'm going to jump in here and say, I'm a little bothered by the amount of "free loaders" or simply ridiculous people out there.

                          You bought a car knowing it has problems for a dirt cheap and now you want someone else to drive over there to fix it for you? where is the logic in that?

                          Whats next? I bought a rust bucket, you think you can drive 5 hours over to my place, weld it up and paint for me?

                          Comment


                            #14
                            I'm trying to throw in a new dash, wire rear fogs, and wire a 13 button OBC in place of my broken 6 button one today if anyone wants to come by and help. 540-718-4103 and im like 2 blocks from broad and belvedier next to vcu.
                            sigpic
                            1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
                            1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
                            1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

                            Comment

                            Working...
                            X