100% ready to go M52B28 swap for sell.

[avery0829]

To start things off, I was extremely excited to finally have a chance to do this swap. It turns out money is needed in other places especially college. I am looking to make my money back on it and feel like it will be a pretty damn good deal seeing as everything is ready. Buying this will save a ton of time waiting for parts, driving out to places to pick things up and the hassle of piecing it together. Unlike other "full swaps" this has all maintenance I felt that needed to be done to be reliable and quite a few power add ons.

Engine.
M52B28 from a 97 328i Auto. 110,000 miles from Campbell Auto Recyclers
Compression was 190-200.

Maintenance.
Top to bottom.
(All Victor Reinz and OEM)
Valve cover gasket + Valve Cover Nut Seals
DGK OEM spark plugs
OBD1 Coilpacks
Intake Manifold gaskets
Fuel injector O-rings
Oil filter + kit
Oil filter Housing gasket
Aluminum thermostat housing + Gasket
Thermostat + O-ring
Rear Water flange gasket
OBD1 Exhaust gaskets

Bottom.
Oil pan Gasket
O-rings for dipstick tube.
Oil pick up gasket
Pilot bearing
OEM BMW rear main seal kit ($100!)

Clutch/Flywheel/Transmission/Drive train
ZF Trans with Linkage with 40k
Sachs OEM clutch
F1 Racing 14lb light weight flywheel
New pressure plate hardware
New Flywheel bolts
New Slave Cylinder
New Throwout bearing
Sachs Pressure plate
E36 M3 drive shaft
New CSB
New guibo

Harness/Sensors/ECU/Intake
Full OBD1 Harness with ALL sensors made to fit late model E30 (no adapter)
OBD1 intake
Red Label 413 ECU w/ TRM chip
Euro MAF
Bimmerworld intake boot (3" I believe)
AFE Cone filter

Cooling
Super clean late model rad
Spal 16" electric fan
All hoses
OBD1 Spider hose in great shape
New late model expansion tank

Required Swap Parts
E21 Brake booster with E30 Master Cylinder (Already modded to bolt up)
E34 Pan with Pick up, dip stick and tube
Reinforced sub frame
E21 Trans mounts
E28 Motor mounts
E34 throttle Cable

Exhaust
AA rep headers- Single 2.5 inch-Cat-Y pipe- Remus catback
Gaskets and all hardware


Other
Full OBD2 harness plus sensors
OBD2 intake

Overall I think I have everything listed, all hardware is in bags labeled. So no worries about that. Also I'd like to add that everything I have done was proper and how I would want it in my car. If you have any questions feel free to send me a PM or post here.

Price $3900

Here's a link to the start of a build thread.

http://www.r3vlimited.com/board/showthread.php?t=186434

Here how it is now. I'll post some more pictures later

[e30s52]

That intake boot is a 3.5....

[Knoepfler]

you should wait a month! :D

[10Toes]

$4100, does this include installation?

[ck_taft325is]

Seems steep, but that's everything you need for the swap. GLWS, man.

[avery0829]

$4100, does this include installation?

For you. No.

Haha just let me know!

[avery0829]

Price reduction bump.