Help with output shaft seal

[spiDmang]

Anyone have a thin-walled 30mm or 1-3/16in socket I can borrow to get my output flange off of my trans?!

I'm located In lynnwood!

Help!!

[2mAn]

hope you got it done brotha!

[Grand525]

Just get a socket for GM Oil Pressure Sensor. It's about $10 at local Vatozone or OhReally.
USe MAPP gas torch to heat it, or you'll be using a few of those sockets.

[spiDmang]

hope you got it done brotha!

Maybe it'll be done today! Still gotta wait though cuz I have a shifter rebuild kit on the way plus some other goodies!

Just get a socket for GM Oil Pressure Sensor. It's about $10 at local Vatozone or OhReally.
USe MAPP gas torch to heat it, or you'll be using a few of those sockets.

GREAT info!!! Thank you... How much do torches go for anyway?

[Killacortes]

I have one man but im all the way down up in Anacortes. I used a impact gun on the highest setting to break that flange loose

[DrJosh]

Maybe it'll be done today! Still gotta wait though cuz I have a shifter rebuild kit on the way plus some other goodies!


GREAT info!!! Thank you... How much do torches go for anyway?

Like $15 at mclendons and they have their own starter.

[spiDmang]

So I tried the gm oil pressure socket and its way too small

[Grand525]

Is it AT or manual? Idk if they are the same or different.
Maybe the safety collar is in the way? It needs to be removed.

[spiDmang]

Is it AT or manual? Idk if they are the same or different.
Maybe the safety collar is in the way? It needs to be removed.

It's a manual, and from my research, the nut is 1-3/16 or 30mm. The gm oil socket is a 1-1/16...

[Grand525]

Idk if there's a discrepancy about this GM socket.
I've used it a couple of times, and it was GM Oil Sending Unit socket. It was 1" 3/16.

See how they show 2 different size:

http://www.northerntool.com/shop/tools/product_200379088_200379088

http://www.sears.com/shc/s/p_10153_12605_SPM5784571801P

[spiDmang]

Idk if there's a discrepancy about this GM socket.
I've used it a couple of times, and it was GM Oil Sending Unit socket. It was 1" 3/16.

See how they show 2 different size:

http://www.northerntool.com/shop/tools/product_200379088_200379088

http://www.sears.com/shc/s/p_10153_12605_SPM5784571801P

Hmmm interesting...where did you buy yours from? I'm picking up a socket from a buddy of mine, so it doesn't matter now, but I appreciate the help :)