WTB: M52 (84mm) crank, 135mm rods, and M20 block

[Gregolas]

Like the title states, need an M52 (84mm stroke) crank.

Need 135mm rods (M52 non vanos/S52/S50/M54B30) all 6.

Also need an M20. Would prefer a complete block with accessories and rotating assembly.

Text me at 253 8209159. Thanks!

[I5_E30]

I have an 99' M52 crank and choice of rods available M52, S50

[spiDmang]

ahhhhh shiiit <3

[djjerme]

Make sure you get the right crank (correct stroke length) if you are doing a stroker motor.

[Gregolas]

Make sure you get the right crank (correct stroke length) if you are doing a stroker motor.

This is the one piece I need to research a bit more. I plan on going the Mahle Motorsport piston route so I know I need the 84mm crank.

[ZekeTheSneak]

I have a complete s52 that I'm gonna part. 1000 bucks.

[2mAn]

This is the one piece I need to research a bit more. I plan on going the Mahle Motorsport piston route so I know I need the 84mm crank.

Yes

[e30josh]

You need a m52 crank, the s52/m54 crank is 89.6mm stroke. Should be cheaper!

[Gregolas]

You need a m52 crank, the s52/m54 crank is 89.6mm stroke. Should be cheaper!

Thanks for clarifying! I have been reading threads non stop for 2 days and all of the info is becomig a blur at times.

[2mAn]

M52 crank should be no more than $250 max but you should try to get one for $100