Miami FL people?

[ForcedFirebird]

got any contact info for them john?

I will get you a ph # and PM or text you. I have my eye on his 4 puck clutch and he is interested in me porting his m20 head and making a big brake kit, probably this weekend, maybe even he will show up again on Tue :)

[e30 gangsta]

Cool let me know thanks man!

[ForcedFirebird]

Cool let me know thanks man!

Sure thing.

Also, I just installed an AA half-shaft and they are actually good quality, and fit like a glove, was surprised really that they are only $70 - just be ready to use a 32mm socket instead of the stock 30mm. Took about an hr on the lift, and you know you have some time comin to ya ;)

[Jonny Cash]

No, usually on Wed, I will be putting up the "will paint your house for $500" signs......

oh no you didnt.

[durtyE30]

Okay guys!

Looking for S5x/M5x motors...

I'm looking to do a DOHC swap to my 318is. Anyone have a motor for sale in the South Florida region, preferably low miles, non-vanos, and including accessories +harness + ecu?

It must be good-to-go

[e30 gangsta]

AA halfshaft? what do you mean AA?

And yeah I wanna swap out that dumb halfshaft and get these coils installed :D

[durtyE30]

He means Advanced Auto Parts.

[Good & Tight]

Okay guys!

Looking for S5x/M5x motors...

I'm looking to do a DOHC swap to my 318is. Anyone have a motor for sale in the South Florida region, preferably low miles, non-vanos, and including accessories +harness + ecu?

It must be good-to-go

Give Rennie a call at Redline BMW 954-783-7003. They have a low mileage S50 still in the car, I think it's an automatic car so the engine is not beat up.
Tell him Otis sent you.

[ForcedFirebird]

Give Rennie a call at Redline BMW 954-783-7003. They have a low mileage S50 still in the car, I think it's an automatic car so the engine is not beat up.
Tell him Otis sent you.

Hmm. I have an m54b30 crank and rods if mr.durtye30 was wanting to stroke it hehe.

How you been Otis? Still curious about the new e30 we caught wind of :)

[Good & Tight]

Hmm. I have an m54b30 crank and rods if mr.durtye30 was wanting to stroke it hehe.

How you been Otis? Still curious about the new e30 we caught wind of :)

Been busy at work John, car is in on a transporter in route. I'm excited to get it.

[ForcedFirebird]

m54b30 running. Has 144k miles...

[Good & Tight]

m54b30 running. Has 144k miles...

hmmmm.... temting. Are you selling the engine as a short block or will all the acc and wiring harness?

[ForcedFirebird]

hmmmm.... temting. Are you selling the engine as a short block or will all the acc and wiring harness?

Depends on what the replacement comes with, but judging by the past engines I bought from them, it will be long block and some accy's - harnedd is doubtful since they usually don;t even take the time to disconnect the engie harnesses and cut them by the main connector, the idiots. Probably takes them more time to hack through the wires than just pulling the stupid plug.

Reminder: Low compression in one cyl.

This has the same crank as an s52 = forged. This crank/rods/pistons will work in an m50 directly, and with a spacer, crank/rods will work in an m20.

[ForcedFirebird]

Hey, few of us bimmers are getting together at my shop on Tue night (not e30 specific, but let's rep!), you guys are all welcome to come by for a bit. Starting about 7:30-ish till whenever.

[Good & Tight]

Looking for stock front springs, if you have a set let me know tks.