Official Southeast Fall e30 Rally - November 2nd-4th

[rs4pro3]

Someone bring the tools needed for a quick axle swap :) I don't have a breaker bar large enough or the large socket for it.

I have used good axles but not way to do it myself :( No air either :(

I'll bring them, looks like friday or saturday evening is going to be a wrench fest

[dinanm3atl]

Someone bring the tools needed for a quick axle swap :) I don't have a breaker bar large enough or the large socket for it.

I have used good axles but not way to do it myself :( No air either :(

[atomic]

Gps Coordinates !!!!!!

For anyone coming to this who does not know how to get to it and has or has access to a Navigation device here is the latitude and longitude to the campground checkin location....


W 83.93630
N 35.63681






hope to see you there !!

[dinanm3atl]

Nice... New injectors for me and maybe some other stuff!

[e30prideTN]

You just need a flat head screw driver, a 10mm socket and a ratchet. Very easy job. I can help install them no problem, but I think Steve can do it with his eye's closed now as he's had to pull them at the last 3 driving schools.

Halston, I just looked up stairs and I've still got the ones I yanked from the white car a year ago. They have been cleaned, and have brand new o-rings and pintle caps on them. They can be yours for $45

Hahaha, thanks for the info. I was actually thinking this morning to myself that I need to replace my injectors this weekend. I have the 19lbs but it's killing my car so until I can get the m30 afm w/ afpr, I think I'll stay stock. The car is waaaay lean.

[atomic]

posting this here since it looks like Matt is coming and needing some parts and others who are looking to do the same can post it there as well. Hope this helps for those who need it. Matt Robertk or rs4pro3 might be someone who has what you need. Here is the link http://www.r3vlimited.com/board/show...285#post872285








blahblah

[dinanm3atl]

Bring them

I bring you cash!

I think mine are leaking :(

Excellent event now!

[RobertK]

Steve what do I need to swap them there sir? Since I watched you do it in 10 minutes!!! Where can I buy O-Rings for them? I think NAPA sells them for Bosch injectors...

Goto Auto Zone or Advanced and tell them you need injector O-Rings for a 1990 Mustang 5.0. They cost like $5 a box.

[rs4pro3]

You just need a flat head screw driver, a 10mm socket and a ratchet. Very easy job. I can help install them no problem, but I think Steve can do it with his eye's closed now as he's had to pull them at the last 3 driving schools.

Halston, I just looked up stairs and I've still got the ones I yanked from the white car a year ago. They have been cleaned, and have brand new o-rings and pintle caps on them. They can be yours for $45

[dinanm3atl]

Halston I have a set of injectors but they were working great when removed from my 88 325is, but they have been out of the car for 3 years. I don't know if I'd be comfortable just throwing them straight into a car without cleaning them up first and replacing the o-rings.

bring them :)

hehe


I can buy O-Rings for them probably locally and bring them too...


Steve what do I need to swap them there sir? Since I watched you do it in 10 minutes!!! Where can I buy O-Rings for them? I think NAPA sells them for Bosch injectors...

[Sponce]

oh... and i am trying to bring the girl.

[Sponce]

if the o-rings arent cracked or anything, then they will be fine. i just did mine last week, didnt replace, just cleaned up, i can give you a hand throwing them in. i have a 4 cylinder, and dont know how the 6 is set up, but if it is anything like mine (very likely) you will want to get the upper intake gasket, (you need to remove to get to the injectors) and the 2 throttel body gaskets (not nessacy, but i recomend) besides that, i didnt really need anything else, but you might want to make sure you check, any hoses with clamps that might need to be removed, you might want to ghet some new clamps, just general stuff like that, but besides that, its prety straight forward.

[rs4pro3]

Halston I have a set of injectors but they were working great when removed from my 88 325is, but they have been out of the car for 3 years. I don't know if I'd be comfortable just throwing them straight into a car without cleaning them up first and replacing the o-rings.

[dinanm3atl]

I mainly need injectors and also maybe a fuel pump with a working check valve :(

Someone bring me 6 and help me install at the rally :)

[mattdk318i]

You guys are beginning to worry me with all this sausage chit; I'm bringin a grinder.

Quoted for truth