Part#: 51-21-1-953-023
have you been pointed to realoem yet ? you can find all the part numbers for your car there. just input the last 7 digits and it will be specific to your car....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
-
the etm is probably the closest you are going to get. i've never seen a wire layout for any e30. you might try looking in realoem for an idea of how it lays out.
edit : someone is selling...Last edited by 82eye; 04-29-2024, 10:15 AM.
- Likes 1
Leave a comment:
-
-
most guys are updating to the new cooling system. some things are getting hard to find for either, but the early system is just about impossible to replace, with a range of parts now nla. the crossover...
Leave a comment:
-
you can download an etm here Index of /Manuals/BMW (wedophones.com)
they have one for a 90 vert but that is the last year for one vert specific....
- Likes 1
Leave a comment:
-
i know it's been used successfully on at least one m20. it was ford branded. guy over on bfc got one....
Leave a comment:
-
rebuilt my entire stock shifter with all new bushings clips etc. trans was in place. driveshaft was out. could probably done with the ds in place but harder. mine is not an ix though. pretty sure that...
Leave a comment:
-
it's best accessed from under the car. i'd get a good look at things first. it looks like there may be more going on.
there are bushings that go on either side of the shift rod, not just...
Leave a comment:
-
if need be rock auto sells cheap blue streak remans. possible solution but approach carefully.
a bunch of the remans rock auto sells are ford branded lol. they have...
Leave a comment:
-
-
you can sometimes fix a ripped seal with rtv silicone. that may be asking a bit much of it though. the only real fix is replacement. wonder if there is going to be an aftermarket mfgr start to make t...
Leave a comment:
-
only thing i can think of is a crappy caliper right from the box....
Leave a comment:
-
-
depends on the year and which market they were sold into. little more info here.
Did e30 mtech cars come with m badges? - R3VLimited Forums...
Leave a comment:
-
i'd start with a look in the 24v swap section and look at the wiring harness pinouts to trace what it should be. hopefully with that you can find where the issue is. a lot of guys build their own charts...
Leave a comment:
-
-
-
have you run it with this starter ? there's been a number of threads on ltw flywheels not meshing properly with an e30 starter. i installed a rhd fw and went to a newer starter in the end....
Leave a comment:
No activity results to display
Show More
Leave a comment: