there is a soft spark limiter, it will retard timing to a certain amount before a hard limiter. It is supposed to make the "hard" limit less abrupt. Usually the base tune timing pull is 12deg, but I've never seen it prevent the hard limit--so it'll keep pulling until spark and/or fuel cut if you have it enabled.
I really doubt those are 23.8 gph, as that means they are like 1500cc/min injectors...perhaps 23.8lb/hr?
If you don't have dead times for the injectors themselves, leave the dead times alone.
I really doubt those are 23.8 gph, as that means they are like 1500cc/min injectors...perhaps 23.8lb/hr?
If you don't have dead times for the injectors themselves, leave the dead times alone.
Comment