Dynoaction, burnout and 0-190km/h:
Still missing ~100hp. To be continued..
Edit. Specs (OLD SPECS, will update at somepoint)
Engine:
-original m20b25
-m54b30 pistons (compheight modified slightly)
-m50 non vanos conrods
-m21 diesel 81mm crank
-enem z45 turbo camshaft
-ported head
-"o-ringed" block with stock headgasket
-holset hx52 mfs with #16 exhaust housing
-custom exhaust manifold
-600x300x76 intercooler
-4,5/3,5" exhaust system
-s38b36 flywheel with 240mm sintered disc & sachs race -765
-megasquirt + msd 6al
-630cc siemens deka
-2x walbro 255LPH with 1,5L catch tank
-PLX wideband lambda
-594hp/794nm @ 2bar
front axle:
-height adjustable (135kg) springs with spax adjustable shocks.
-camber adjustable topmounts with uniball
-e87 1-series rear hubs in front
-330i/d discs (325x25) (with 5mm spacer)
-e32 735i calipers
-POM control arm bushings
rear axle:
-e30 m3 gr.N rear springs (180kg) with spax adjustable shocks
-camber/toe adjustable subframe
-e36 compact rear hubs
-e34 m5 discs (300x20) and calipers
-POM bushings @ subframe + diff, powerflex @ trailing arms
-clutch type 25% LSD diff 3.91:1
Drivetrain:
-stock 260 getrag
-stock transfer case
-7mm spacer in front of front driveshaft
-reinforced front diff 3.91:1
-stock halfshafts
Still missing ~100hp. To be continued..
Edit. Specs (OLD SPECS, will update at somepoint)
Engine:
-original m20b25
-m54b30 pistons (compheight modified slightly)
-m50 non vanos conrods
-m21 diesel 81mm crank
-enem z45 turbo camshaft
-ported head
-"o-ringed" block with stock headgasket
-holset hx52 mfs with #16 exhaust housing
-custom exhaust manifold
-600x300x76 intercooler
-4,5/3,5" exhaust system
-s38b36 flywheel with 240mm sintered disc & sachs race -765
-megasquirt + msd 6al
-630cc siemens deka
-2x walbro 255LPH with 1,5L catch tank
-PLX wideband lambda
-594hp/794nm @ 2bar
front axle:
-height adjustable (135kg) springs with spax adjustable shocks.
-camber adjustable topmounts with uniball
-e87 1-series rear hubs in front
-330i/d discs (325x25) (with 5mm spacer)
-e32 735i calipers
-POM control arm bushings
rear axle:
-e30 m3 gr.N rear springs (180kg) with spax adjustable shocks
-camber/toe adjustable subframe
-e36 compact rear hubs
-e34 m5 discs (300x20) and calipers
-POM bushings @ subframe + diff, powerflex @ trailing arms
-clutch type 25% LSD diff 3.91:1
Drivetrain:
-stock 260 getrag
-stock transfer case
-7mm spacer in front of front driveshaft
-reinforced front diff 3.91:1
-stock halfshafts
Comment