Originally posted by Jokester
View Post
Announcement
Collapse
No announcement yet.
15" Eurowaves
Collapse
X
-
Last edited by nogapersnBMWs; 02-04-2019, 12:06 PM.1989 332iS AW2 @ 2,342 lbs. m20b31 (JE FSR 10.5:1; 284/280 cam; ST+1 Intakes; RHD 40mm ITB/CF Plenum; Stahl 1.5"/CRMB X/Borla XS Pro; TMS J-Stock suspension (Ver. 2); M3 E3 undertray/VAC CF splitter; exhaust blown difusser; (Teves Mk60 ABS in trunk next)
Originally posted by Jb325isSucks for everyone involved. Lots of guys are just building IG cars these days... Look good on the internet, but in real life they're hacked up piles of shit.
-
Originally posted by nogapersnBMWs View PostCurious, which opinion on sale is it now?
If all four Euroweaves purchased bent, what is the fifth so-called "free" Euroweave like?1989 332iS AW2 @ 2,342 lbs. m20b31 (JE FSR 10.5:1; 284/280 cam; ST+1 Intakes; RHD 40mm ITB/CF Plenum; Stahl 1.5"/CRMB X/Borla XS Pro; TMS J-Stock suspension (Ver. 2); M3 E3 undertray/VAC CF splitter; exhaust blown difusser; (Teves Mk60 ABS in trunk next)
Originally posted by Jb325isSucks for everyone involved. Lots of guys are just building IG cars these days... Look good on the internet, but in real life they're hacked up piles of shit.
Comment
-
Originally posted by agent View PostMake your own thread please. Not here.Originally posted by HollandThere should be a restraining order to keep kids 100 feet from that car at all times. Plus execution on the sight to anyone who places a shopping cart within 200 feet of the thing.
Comment
-
Originally posted by nogapersnBMWs View PostCurious, which opinion on sale is it now?
If all four Euroweaves purchased bent, what is the fifth so-called "free" Euroweave like?
EDIT: Duplicolor Bright Silver Metallic Chrysler (EBCC0410) or Wurth silver metallic spray paint (892180 S) both match the factory color great!
Comment
-
You can tell OP/seller is not a "straight-up" when he tells you the buyer that "he can't send a refund unless [you] close the PayPal claim because they are holding onto [seller's] money." My translation of this is: seller's money is now all locked-up in escrow by PayPal pending resolution of your case, and pissed-off seller doesn't have any extra money on the side to resolve this or doesn't want to resolve this as he was able to unload his unwanted trash on you for a substantial amount of money. Don't ever close the PP case until you are fully satisfied.
Let's review seller's description of wheels:
Originally posted by e30EuroParts View PostIn fully refurbished condition - stripped, powdercoated + clear coat... Wheels have been choosen best ones from around 20 I have had previously. No cracks, no welds, no curb rush. Will come with air valves already installed... Paypal possible at buyer expense only, or payment as friends&family..."
Have you sent a pic of that $400 receipt for the bent wheel repair to PayPal? I wouldn't ever accept seller's offer of "a lower refund than I requested". And if you did previously accept a lower refund amount, I would send PayPal the email where seller offered you a "5th wheel" as that would substantiate your acceptance of seller's lower offer. But since it seems you're not getting the "5th wheel" as a partial refund, you now want the full $400 to make you whole again. I'd even ask for more of a refund as wheels are not powder coated. Heck, even send PayPal a link to this thread...1989 332iS AW2 @ 2,342 lbs. m20b31 (JE FSR 10.5:1; 284/280 cam; ST+1 Intakes; RHD 40mm ITB/CF Plenum; Stahl 1.5"/CRMB X/Borla XS Pro; TMS J-Stock suspension (Ver. 2); M3 E3 undertray/VAC CF splitter; exhaust blown difusser; (Teves Mk60 ABS in trunk next)
Originally posted by Jb325isSucks for everyone involved. Lots of guys are just building IG cars these days... Look good on the internet, but in real life they're hacked up piles of shit.
Comment
-
PayPal has a link to this thread. They may have been powder coated. I couldn’t tell definitively since they were covered in clear coat, but there was a ring of bare metal around the valve stems. It seems to me a powder coater would want those removed first. Besides that though I agree they weren’t described accurately.
Comment
-
In an inconspicuous place on wheel you could use acetone on a small cotton swab, as it will remove paint but not affect powdercoating.1989 332iS AW2 @ 2,342 lbs. m20b31 (JE FSR 10.5:1; 284/280 cam; ST+1 Intakes; RHD 40mm ITB/CF Plenum; Stahl 1.5"/CRMB X/Borla XS Pro; TMS J-Stock suspension (Ver. 2); M3 E3 undertray/VAC CF splitter; exhaust blown difusser; (Teves Mk60 ABS in trunk next)
Originally posted by Jb325isSucks for everyone involved. Lots of guys are just building IG cars these days... Look good on the internet, but in real life they're hacked up piles of shit.
Comment
-
Originally posted by nogapersnBMWs View PostIn an inconspicuous place on wheel you could use acetone on a small cotton swab, as it will remove paint but not affect powdercoating.Last edited by Andrew325is; 02-25-2019, 03:40 PM.
Comment
Comment