H&R coilover pre-order
Collapse
X
-
I am a buyer for the next time you have these available. Not on Instagram so please don't forget us old forum only types and let us know when you some in stack. Thanks.Leave a comment:
-
Any camber plate that fits a 60mm spring will work with these; we typically use Ground Control as we feel they make the best ones on the market.
Good to know! I'll likely be down for a set around the middle of the year. I'm sure my wife will be happy for the car to be less violent over the shitty local streets.
Is there a good option for front caster/camber plates? I made adjusters to dial in the rear using e39 bolts, so it'd be nice to get the front aligned too.Leave a comment:
-
Good to know! I'll likely be down for a set around the middle of the year. I'm sure my wife will be happy for the car to be less violent over the shitty local streets.
Is there a good option for front caster/camber plates? I made adjusters to dial in the rear using e39 bolts, so it'd be nice to get the front aligned too.
Leave a comment:
-
We ended up selling 14 E28 kits on the pre-order, but only 3 E30 kits. We're trying to streamline the process so that we can do a group buy quarterly.
They do! I actually got to drive an E20 (2002 Turbo) with this kit on it when I was in Germany last summer, and it rode just as good as the E30 and E28 kits that we usually sell. DM me if you're interested and I'll get you a quoteLeave a comment:
-
Are they doing E10 kits? Im looking into the Raab Classic KW's but theyve been a nightmare to deal withLeave a comment:
-
How did this initial pre-order go? Any plans for another in the future? (2025 or 2026)Leave a comment:
-
Made in-house at H&R, I've been to the factory twice and seen them being assembled.
I don't know the exact measurement of how much shorter the struts are from factory, I would guess about 1.5". I don't have any E30 sets left in stock to measure unfortunately. I can say I've never felt them bottom out and hit bumpstops, even when lowered all the way.
The kit we typically sell is the Street Performance kit, with spring rates that are comparable to H&R race springs. If you want something different, we can order the Tief kit (ultra low ride heights), the Clubsport Nurburgring kit (racing kit with very stiff rates), or even a fully custom kit with adjustable dampers and whatever rates you want ($).
If one strut was to leak, we would work with you to either get you a new set, or expedite a repair of the leaking part. Mine look like I just installed them after 7 years, fwiw.
PM incoming!
Leave a comment:
-
How much shorter is the front strut?
What spring rates or rate packages are available?
How's the warranty if just one strut leaks?
I thought they were a koni? /\ /\Leave a comment:
-
Dang. I really want a set, but can't spend that much cash right now. Fingers crossed for a group buy later!Leave a comment:
-
Last week for the pre-order! I have a ton of E30 core housings to send out, so we don't need your cores back until after you get the coilovers.
Some photos of SpasticDwarf 's old e30 (now owned by iXBeater ) that we installed these coilovers on also
Leave a comment:
-
IIRC, the wheels were 15x7 et25 with 15mm spacers all around. 205/50/15 tires.
From driving these and a H&R race/Bilstein B8 setup back to back, I would say the dampers are a bit softer on high speed damping and firmer on low speed. So small impacts around town it rides better, but on the highway they float less.Leave a comment:

Leave a comment: