JOM Coilover System Group Buy #3

[mightywhitey]

is it bad if you install them upside down? Im gonna go with yes as the car will not go as low. I already informed you I cannot sell you just the adjuster.

$440 shipped.

[fporro]

I'm trying to understand and purchase a set of front adjusters.

I don't know how they get installed upsidedown, just curious. is that bad ?

[mightywhitey]

If you are not buying or reviewing what are you doing in my thread.

[fporro]

Noob questions, can i use billy sport shocks and H&R springs?

Im not sure I understand what youre trying to accomplish.

I think people are starting to see the value of screwed on front adjusters that do not require perch customizing.
(if front springs are 2.5" to 60mm at one end)

[CHIF8008]

You did it wrong.

YOU did it WRONG

just pull it apart and put it back together correct. just flip the sleeve so it hangs over the strut. think of it like a sock sliding over your...foot. what you did- is described as when you pull a sock off and your toes are the last thing still in the sock.(your leg being the strut housing)

[Edirtyy808]

as you can see the front adjuster, it has the tiny tube on top of the adjuster. i installed exactly as is. some people install it upside down, but i didnt. i didnt put the tiny part in to the housing, i left it as is. but it seems like it doesnt not affect how low it goes. or does it??

[Edirtyy808]

You did it wrong because its not low enough. Post a picture of the stut housing and Ill bet you its upside down.

I'm pretty sure it's not upside down, when Installed, spring was not even close to being compressed, and I cut off the spring perch, the adjuster sits an inch above where I cut the perch. And I cut the perch almost totally Off.

[panzertank]

When's the next order?

Pm'd

[spike68]

Noob questions, can i use billy sport shocks and H&R springs?

Im not sure I understand what youre trying to accomplish.

[Dsun]

Noob questions, can i use billy sport shocks and H&R springs?

[mightywhitey]

You did it wrong because its not low enough. Post a picture of the stut housing and Ill bet you its upside down.

[Edirtyy808]

You did it wrong.

How'd I do it wrong? The tiny adjuster, I just left it on the top rather than screwing it into the housing. Does it make a difference?

[fporro]

its been a week since i installed these. fronts are all the way down, but oil pan is like 3 to 4b inches off the floor. did i install them correctly? or do i need to let it settle more?

let me take a look

[mightywhitey]

You did it wrong.

[Edirtyy808]

its been a week since i installed these. fronts are all the way down, but oil pan is like 3 to 4b inches off the floor. did i install them correctly? or do i need to let it settle more?