JOM Coilover System Group Buy #3

[drummerchubbs]

^^nice right there!!! Good job.

[Tico Frank]

Vert kits sold out.

Any idea when the Vert Kits will be back in stock?

[FS FTW]

^^nice right there!!! Good job.

Thank you sir!

[drummerchubbs]

Thank you sir!

How many threads you have in the front and rear?

[mightywhitey]

Vert kits and e36 kit back in stock

[drummerchubbs]

Is there any way taking the rear springs out without unbolting the diff??? Tips please. Thanks

[FS FTW]

How many threads you have in the front and rear?

The front I'm not entirely sure..I'd say I'm somewhere around 3/4 of the way down with all spring pads removed. The rear, I'm not even running the adjusters. I had them all the way down and was kinda disappointed with the results. So I put it back up on the lift, removed both adjusters and also the bottom spring pad and that gave me about another inch or so. I left the top pads in though, to keep that element of stability for the spring.

Is there any way taking the rear springs out without unbolting the diff??? Tips please. Thanks

I literally use a pry bar and pried it up from the bottom and popped it out. Dangerous, yes. But there wasn't nearly as much tension as anticipated, and it came out fairly easy.

[Denniswhat]

Is there any way taking the rear springs out without unbolting the diff??? Tips please. Thanks

Disconect the sway bars and the struts and it will drop down enough to pry them.

[CHIF8008]

Disconect the sway bars and the struts and it will drop down enough to pry them.

yes. just unbolt to sway bar links and the bottom shock bolt. will droop down enough to get it out just fine

[Denniswhat]

More pics for potential buyers.

[drummerchubbs]

Can someone post a pic of the front strut assembly installed with the coilovers lowered to desired position? Im having difficulty adjusting them. Any tips?

[e30gentry]

Can someone post a pic of the front strut assembly installed with the coilovers lowered to desired position? Im having difficulty adjusting them. Any tips?

A lot of lubrication and make sure they are going in right. I will try to take pictures. As of now this is the best i can find:

http://www.r3vlimited.com/board/showthread.php?t=220171

[drummerchubbs]

I threaded it on all the way where the stock shock was before. I wonder if I did something wrong.

[Denniswhat]

Post a pic of how you gave it setup.

[drummerchubbs]

Sorry for crappy iPhone photos. I really want that "low" everyone is talking about.