M20 Turbo manifolds group buy manifolds shipped today..!!!

[kbaszak]

Count me in too

[619E30]

I'm in for a 44mm wastegate provision

[Good & Tight]

Count me in too

Added to the list

I'm in for a 44mm wastegate provision

Yes they will all have 44mm wastegate provisions.

List updated.

[88SuperETABD]

Count me in....can you do me a favor and measure distance from Flange (face that attaches to head) to the outer most pipe OD? Basically the dimension from flange towards where the strut tower would be...

[MR 325]

I'm all antsy in my pantsy for one of these manifolds!

[Good & Tight]

Count me in....can you do me a favor and measure distance from Flange (face that attaches to head) to the outer most pipe OD? Basically the dimension from flange towards where the strut tower would be...

Here's the measurement from the exhaust port # 4 which is in line with the shock tower.
It's 5-1/2" once the head flange is on.

I'm all antsy in my pantsy for one of these manifolds!

Me too, can't wait to get them.

[Dyagciog]

Add me too!

[pandaiswong]

Put my name on the list.

[e30 gangsta]

Add me too the list please

[funcrew]

Count me in as long as the manifold clears the AC compressor.

[Good & Tight]

This group buy is a go when I receive a minimum of 7 deposits.

See first page for updated delivery time and deposit info.

[pandaiswong]

I'll have it to you Wednesday.

[BMWManiac]

So the coil can remain in the stock location and the oil cooler lines are fine as they are? Do we use the stock manifold gaskets with this?

[Good & Tight]

So the coil can remain in the stock location and the oil cooler lines are fine as they are? Do we use the stock manifold gaskets with this?

Clears the oil cooler lines. The coil will need relocating, even if it clears it's best to keep it away from excessive heat.

[MR 325]

So excited for this. It's going to give me an excuse to re-do my setup.