Wiring a C101 Connector: Geting Pins, Crimpers and a Cheap Pin Removal Tool!

[Northern]

I think the connector with the cut wires is the donor connector, pins from the actual harness aren't cut.

[choleaoum]

ahhhhh where was this post when i was doing the wiring!! sticky this!

[2mAn]

bump!

does anyone know of another place to get the pins from? getbmwparts.com has them for $1.78 a piece, seems like a lot, especially when the other pins are less than $1 each. seems like they marked up the price on the ones that are really needed

[nokincy]

I just ordered some from turner for .95 each.

[golde30]

I just paid the dealer whatever the hell they were asking. I learned not to even blink at parts that are less than $100. Cars are an expensive hobby.

[ApexMotorsports]

Anyone know where to get the engine harness pins ? Example, the motronic 1.3 pins (ecu pins) and all the pins for injectors etc (all of the pins on the engine sub harness.)

[2mAn]

Just got my order in, purchased everything from Turner Motorsports, cost $45 shipped. Well worth it in my opinion. Now to get the proper crimper tool

[MaikelK]

Does anyone has an idea about the part number of the square engine side harness connector and pins?

I'm swapping my 325e engine to a 325i with turbo.
But eta is square, 325i is round.

I'm trying to keep the eta engine complete, as you never know with a project haha.

Cant seem to find the right part number on the bmwfans.info!

[Mistawall]

been looking for this thread bumpedy bump

also i ordered the pins from my local bmw .85 each and 9$ for the c101

[Danny]

Been looking for these so thought I would post up in case anyone else needs them...
The FEMALE pins for the C101 are as follows:

Wire Size: Part Number:
0.5-1.0MM- 61-13-1-376-202
1.0-2.5MM 61-13-1-376-204
2.5-4.0MM 61-13-1-376-206

[MyE30]

Great info OP! This beats paying 200-450 when covering a harness or making a PnP harness is so easy on your own.

I've made a decent pinout chart (IMO) for a 90 E30 to a 98 S52. if anyone wants it let me know.

[drulle]

Great info OP! This beats paying 200-450 when covering a harness or making a PnP harness is so easy on your own.

I've made a decent pinout chart (IMO) for a 90 E30 to a 98 S52. if anyone wants it let me know.

Sweet! I am very interested...

[2mAn]

does anyone know the part # for the rectangular C101 for the early models?

[justin_l_]

I don't think it's available anymore

[2mAn]

I don't think it's available anymore

I think you're right. I ordered one a while ago and it wasnt the right part. Decided to search more today and found this...

link


#9 doesnt exist on the list and it looks like the early C101.