s50 no starty

[spaceshuttle]

Big black one on the right goes to starter, two on the bottom right go to the fuse box.
I Guess I don't have one to the motor wiring harness unless its the skinny one on the left but that doesn't go to the harness.

[gregslow318i]

looks like you are missing the main power wire from the harness you should have 3 wires total going to the junction box
2 from the fuse box
1 from the s50 harness

[spaceshuttle]

Do you have a picture of where it comes out on the harness. Mine might of got clipped or I am just a blind idiot or something

[325islovE]

^looks like youre missing a power wire for the dme, check that big bundle of wires heading to the dme

on mine two wires(ground, power) come out of the big rubber boot that heads to the dme. If you have the harness apart look for a splice with a bunch of red wires tied together one of those should lead to the junction block on the fire wall.

[spaceshuttle]

Yessss! I found it ha it was clipped right where it comes out. Any ideas on how a should connect it to the junction box should I soldier the appropriate sized wire to it or what?

[gregslow318i]

Yessss! I found it ha it was clipped right where it comes out. Any ideas on how a should connect it to the junction box should I soldier the appropriate sized wire to it or what?

I had a felling it was that....
yeah just resoldier a wire to it that is long enough to hook it up to the junction box

[spaceshuttle]

It started! Thanks for your guy's help. I appreciate it