Announcement

Collapse
No announcement yet.

FYI - the stock booster does NOT clear no matter how much you want it to

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FYI - the stock booster does NOT clear no matter how much you want it to

    Yes, we totally needed a thread for this... my friends and I were dropping the m50 in last night and we looked at the booster and thought it would clear with some persuasion. Nope. It all looked good until we started trying to get the trans to line up. We then tried to use a heat gun to melt the intake and deform it around the booster which didn't work. Propane didn't either. So now I'm going to slot the mounting holes and move it over. Don't be an idiot like me - fix the booster before dropping the motor into the car!
    1997 540i/6 - stock
    1985 325 - M50NV - Getrag 250 - 2.79 LSD - MS2/e -LC-1 - 750cc injectors - Blunttech Manifold - HX35 - AEM UEGO
    1991 318i - M50NV - Getrag 240 - 4.10 open - e36 rack - Smileys - 55w 5000k HIDs

    #2
    yes, slotting the holes is required if you want to use the stock booster... this has been made pretty clear already.


    Full Build Thread Here

    Comment


      #3
      Why do you think peole swap them! idiot.
      Originally posted by b3albakii
      the head was okey .. and in a good mood
      no i didnt over heat it so much
      www.blunttech.com

      Comment


        #4
        Originally posted by MattM View Post
        yes, slotting the holes is required if you want to use the stock booster... this has been made pretty clear already.
        Originally posted by foofopps View Post
        Why do you think peole swap them! idiot.
        Yup, I know :(
        1997 540i/6 - stock
        1985 325 - M50NV - Getrag 250 - 2.79 LSD - MS2/e -LC-1 - 750cc injectors - Blunttech Manifold - HX35 - AEM UEGO
        1991 318i - M50NV - Getrag 240 - 4.10 open - e36 rack - Smileys - 55w 5000k HIDs

        Comment


          #5
          Originally posted by foofopps View Post
          Why do you think peole swap them! idiot.
          LOL

          Comment


            #6
            Thanks for the news flash.
            BimmerHeads
            Classic BMW Specialists
            Santa Clarita, CA

            www.BimmerHeads.com

            Comment


              #7
              Wait a second, are you saying that a newer, more reliable engine fits in our e30? Please, share with me where you buy your drugs.
              Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

              Originally posted by Wh33lhop
              VANOS: sometimes you just need to go full retard.

              Comment


                #8
                Every thread tells you this hehe

                Comment


                  #9
                  Every thread says it doesn't clear by a half inch. I thought for sure there was something I could do to make it fit since that isn't much. Whatever, the engine is in now.
                  1997 540i/6 - stock
                  1985 325 - M50NV - Getrag 250 - 2.79 LSD - MS2/e -LC-1 - 750cc injectors - Blunttech Manifold - HX35 - AEM UEGO
                  1991 318i - M50NV - Getrag 240 - 4.10 open - e36 rack - Smileys - 55w 5000k HIDs

                  Comment


                    #10
                    But the bolt holes are drilled for the M8 or M10 studs - there's no moving it unless you slot holes or something. I got an E21 boost for like $30. Totally worth while.

                    Comment


                      #11
                      Originally posted by 5mall5nail5 View Post
                      But the bolt holes are drilled for the M8 or M10 studs - there's no moving it unless you slot holes or something. I got an E21 boost for like $30. Totally worth while.
                      Yeah, the firewall needs to be slotted. I had a 944 booster but heard the pedal feel is crap so I decided to make the factory booster work.
                      1997 540i/6 - stock
                      1985 325 - M50NV - Getrag 250 - 2.79 LSD - MS2/e -LC-1 - 750cc injectors - Blunttech Manifold - HX35 - AEM UEGO
                      1991 318i - M50NV - Getrag 240 - 4.10 open - e36 rack - Smileys - 55w 5000k HIDs

                      Comment


                        #12
                        Originally posted by trackjunkie21 View Post
                        Wait a second, are you saying that a newer, more reliable engine fits in our e30? Please, share with me where you buy your drugs.
                        Wait a second. Wait. I said fucking WAIT.

                        Just hold the motherfucking telephone.

                        You're saying that there's a newer car, nay, a newer BMW than our E30?

                        Jesus mother-titty-fucking-tapdancing-christ-on-a-carbon-fiber-crutch.



                        Originally posted by Cyrix2k View Post
                        I had a 944 booster but heard the pedal feel is crap so I decided to make the factory booster work.
                        And I'm pretty sure I've only seen one person on this forum say the 944 booster is crap. All it does is make the pedal A LITTLE BIT stiffer. I've read countless swap threads on this and other forums (yep, other forums, no fucking way, right?) with people that used the 944 booster, and they all spoke highly of it.

                        Comment


                          #13
                          Probably could have slotted and begun the move in the time it took to post this thread or sourced a better fitting booster and already had paypal sent. Good luck with the swap none the less.
                          sigpic

                          Comment


                            #14
                            I heard one guy kept the stock booster without slotting the firewall.

                            Comment


                              #15
                              Originally posted by rThor432 View Post
                              I heard one guy kept the stock booster without slotting the firewall.
                              then he modified the intake manifold to work around it


                              Full Build Thread Here

                              Comment

                              Working...
                              X