Announcement

Collapse
No announcement yet.

how fast is your s50e30????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Originally posted by giantkeeper View Post
    I miss my E46 M3 - and the S50'd E36 I sold to build my S50 E30 was boring. So I knew this car would not be ridiculously fast, just be hella fun because of the weight and size differences.

    Also, I always thought 3.15 rear ends with the ZF 1/1 was kind of tall with an S50 that has very little torque. Bump it to a 3.25 or similar and it may get that seat of pants impression everyone looks for. Clearly does not make it quicker, just feel that way.
    It felt nice and quick with the 4.10 and ZF. But, sadly, that was kind of undrivable. ZF+3.46 was OK, but still awfully annoying on the highway. At this point, I'm finding a 3.46 with the 260 livable. The car wants more power, though.
    2006 GMC Sierra 2500HD 4WD LBZ/Allison
    2002 BMW M3 Alpinweiß/Black
    1999 323i GTS2 Alpinweiß
    1995 M3 Dakargelb/Black
    - S50B32/S6S420G/3.91
    1990 325is Brilliantrot/Tan
    1989 M3 Alpinweiß/Black

    Hers: 1996 Porsche 911 Turbo Black/Black
    Hers: 1988 325iX Coupe Diamantschwartz/Black 5spd

    sigpic

    Comment


      #62
      Originally posted by nrubenstein View Post
      The car wants more power, though.
      I'm pretty sure they all do :D
      Originally posted by blunttech
      Always Always go for the reach around if there is an option

      Comment


        #63
        Originally posted by Yeee30 View Post
        i don't wanna sounds like a dick, but u pmmed me with pretty much the same question, and now u go and ask the board!. kind of a douche bag move there. i guess my help isn't good enough. good luck with your swap.

        hey man im sorry i didnt mean to to make you think your advice wasnt good enough, i must of forgot you answered a question about the drive shaft for me because i asked you sooo many. sorry....:sad:


        mtech 2 325ic
        http://www.r3vlimited.com/board/pict...pictureid=7968
        check out my donut vid
        http://www.youtube.com/watch?v=Tw0paUP1FEQ

        Comment


          #64
          Originally posted by phreshkid View Post
          The only driveshaft from an e36 m3 you can use is the one with a 4 bolt rear flange if you want to use the e30 diff. So, said driveshaft has to be from a coupe/vert because I believe sedans are a but longer. Not sure if sedan's are longer, that is just what I assume.

          so far everything is looking good, i just ordered all my parts today and they should be ariving tuesdays. if i have any further questions i will let you know aswell. thanks


          mtech 2 325ic
          http://www.r3vlimited.com/board/pict...pictureid=7968
          check out my donut vid
          http://www.youtube.com/watch?v=Tw0paUP1FEQ

          Comment


            #65
            Originally posted by shiboujin View Post
            sandy sandy vaginas in this thread.
            I guess this means you now have a sandy vagina since you posted here haha


            mtech 2 325ic
            http://www.r3vlimited.com/board/pict...pictureid=7968
            check out my donut vid
            http://www.youtube.com/watch?v=Tw0paUP1FEQ

            Comment


              #66
              Originally posted by ACHTUNG View Post
              How wide are your current wheels and what size tires are you running? What width do you think you'll have to run? I'm wondering since I may have to get wider wheels than my 7.5" width wheels for my S52 swap.
              I have Alpina 16x7's, think I'm running 205/50/16 tires. I would like to get two Alpina 16x8's for the rear but they are damn hard to find. I'm tempted to sell my set of Alpinas and get something else in 16x7.5 front and 16x8.5 rear.
              '87 325ic, powered by S50.

              Comment


                #67
                Originally posted by e30rapidic View Post
                I would like to get two Alpina 16x8's for the rear but they are damn hard to find.
                you just need to find the right person. ;)
                - Fercy -

                BimmerHeads
                Classic BMW Specialists
                Santa Clarita, CA
                www.BimmerHeads.com

                Comment


                  #68
                  Originally posted by e30lyf View Post
                  you just need to find the right person. ;)
                  found a dude in CA that has 2 but he never replied to my emails...I'm guessing he won't ship.
                  '87 325ic, powered by S50.

                  Comment

                  Working...
                  X